Wuhan Nuoxu Plastic Industry Co., Ltd. produces PE material water tanks, dosing tank mixers, anti-corrosion chemical storage tanks, quartz sand cone-bottom pickling tanks, breeding buckets, vegetable pickling buckets, and more. Our products cover horizontal, vertical, flat-bottom, and cone-bottom designs, with a full range of specifications and varieties. Main material: imported South Korean polyethylene plastic raw materials.
Common Colors: Orange, Blue, Green, White, Black, etc. (Double-layered construction with white inside and black outside, etc.)
Performance: One-time molding with smooth interior and exterior, impact-resistant, strong against vibration, and not easily aging.
Application Range: Storage, handling, and cleaning in food processing. Acid washing and degreasing in the chemical industry. Fermentation, pickling, and storage in brewing and vegetable processing industries. Mixing and batching in the pharmaceutical, food, and chemical industries.
Nuoxu Plastics offers free drilling and fitting service. Standard DN15 to DN100 inlets and outlets can be drilled. If you require technical support for pipeline installation, please call Nuoxu Plastics.
Preventive Measures Against Softening and Deformation of PE Tanks:
1. The feed and discharge ports, level gauge ports, flanges, etc. on the PE storage tank body are all formed in one piece without welding, eliminating the need for additional feed and discharge ports. When storing acidic or alkaline substances, acid and alkali-resistant gaskets must be used. When storing **substances (especially),** non-dissolving rubber gaskets should be installed.
2. PE plastic storage tanks are not suitable for containing strong oxidizing agents (such as those with a concentration of over 75% at 60℃ and over 30% etc.) and good solvents (such as alcohols, ethers, ketones, esters) etc.
3. The PE tank is molded using the rotational molding process.
4. Our company's PE plastic storage tanks are made of extruded plastic—linear low-density polyethylene (LLDPE) or linear medium-density polyethylene (LMDPE). These tanks are suitable for storing most alkalis, salts, and many other materials at room temperature.
5. The PE plastic storage tanks use plastic with a low softening point of 108°C and a high fracture point of -70°C, making them generally suitable for storing liquids at temperatures between -40°C and 60°C. For liquids with higher specific gravity or temperatures above 60°C, a steel-lined plastic corrosion-resistant tank should be used to prevent softening and deformation of the PE plastic tank. If the PE plastic tank is to be used for chemical reactions or dilutions, a corresponding test should be conducted in advance to determine the high temperature of the reaction or dilution. The product performance of the PE storage tank, the plastic used in the PE plastic tank has a low softening point of 108°C and a high fracture point of -70°C, so it is generally suitable for storing liquids at temperatures between -40°C and 60°C. For liquids with higher specific gravity or temperatures above 60°C, a steel-lined plastic corrosion-resistant tank should be used to prevent softening and deformation of the PE plastic tank. If the PE plastic tank is to be used for chemical reactions or dilutions, a corresponding test should be conducted in advance to determine the high temperature of the reaction or dilution.
