In landscape construction, the diverse shapes and patterns of the paving gravel polymer enhance and beautify the environment, adding to the garden's scenery. The gravel polymer paving serves as a decorative surface, and the patterns of the gravel polymer paving vary according to the location. Some surfaces paved with gravel polymer in straight or parallel lines can enhance the design effect of the ground.

Aggregate polymer concrete flooring is a novel type of ground covering material. The aggregate polymer imitating stone flooring consists of sequentially laid subsoil, cushion, and aggregate polymer layers. The aggregate polymer layer includes both the base and surface layers, with the surface layer embedded within the base layer, creating an inseparable integrated structure. Additionally, through cutting or grooving techniques, it achieves a stone-like interlocking effect to mimic natural stone. The aggregate polymer imitating stone flooring can be flexibly cast and laid according to different road conditions. It not only avoids the complexities and resource wastage associated with cutting and joining stones in related techniques but also has a simple and easy-to-operate on-site laying process.

Water-washed stone is a construction technique that has gained popularity in recent years. It primarily involves mixing natural river or sea pebbles or gravels with cement in proportion, applying the mixture to the base, flattening it with a load-bearing tool, and then removing the adhesive to reveal the stone's original appearance. Due to the diverse colors and shapes of its raw materials, it can be used to create various patterns and designs, making it widely used in interior decoration and outdoor landscaping. Some large-area exterior wall renovations also use water-washed stone, conveying a sense of natural simplicity.

Cautionary Notes:

1. Pay attention to the content of washed stone; too little affects the appearance, and too much causes poor adhesion. For example, with particle sizes of 3-5mm, the content per square meter should be around 18-20kg.

2. Mix gravel and cement thoroughly before adding water. Clean any debris from the concrete sublayer before laying to prevent loose碎石 from becoming unfastened and cracking.

3. The water-washed stone surface layer can be connected with other paving materials using copper strips or PE separator strips, ensuring the integrity of the water-washed stone edging.

4. Flatten by repeatedly gently tapping and smoothing the mixed paste with a board, ensuring thorough bonding between the mixed paste and the base layer for even stone distribution. Outdoor construction temperatures should not be below 4°C, as this affects bonding and curing, making it prone to falling off.

5. Clean the surface with a sponge promptly when it's semi-dry, and repair the stone granules.

6. Ensure timely protection of finished products. Once fully dried, apply water-based resin to achieve waterproof, stain-resistant, and shine-enhancing effects.