Widely used in industries such as food machinery, pharmaceutical equipment, environmental protection equipment, textile machinery, non-ferrous metals, and water treatment equipment, we provide liquid shot blasting room systems to numerous manufacturers, accumulating extensive experience in surface treatment—covering construction, pre-shot blasting preparation, abrasive selection, and post-treatment for resistance to contamination. We have absorbed the original experience from clients in Zhejiang, Jiangsu, Shanghai, and elsewhere to develop our unique and comprehensive set of stainless steel and non-ferrous metal surface treatment methods. We hold a technical advantage in the design and manufacturing of liquid shot blasting rooms.
Features
1) Liquid sandblasting booth, customizable for clients' site, product characteristics, sandblasting requirements, and conditions.
2) The operational plane can **to a great extent** meet the users' needs.
3) Additional drive units can be added according to the customer's product type to achieve an automated line.
4) Fine sand materials can be used for surface treatment of precision workpieces.
5) Simple to operate and reliable. No floating dust is produced during the process, significantly reducing environmental pollution caused by dust and minimizing the health risks to operators. The abrasive slurry is recycled, resulting in low sand consumption and minimal wear on the sandblasting nozzle, making the operation highly cost-effective.
6) By adding our environmentally-friendly corrosion inhibitor at a 3% concentration to the sandblasting liquid, ironwork pieces cleaned will not rust for 7 days.
7) Equipped with waste collection system for convenient recycling of abrasive waste, ensuring no environmental pollution.
Composition
Composed of the housing, main unit, spray gun, sand storage tank, abrasive liquid pump, flushing pump, air system, spray gun sand system, and electrical system, etc.
Processing Applicability Range
1) Suitable for liquid shot blasting (bead) process.
2) Surface shot blasting for large structural components and surface shot peening treatment for large parts.
3) Ideal for removing oxidation scale, residual salt, and weld slag from heavy-duty large stainless steel products, large molds, welded parts, etc.
4) Surface cleaning and polishing for stainless steel components in the food machinery industry.
5) Suitable for polishing finishing of parts with high precision, small Ra roughness values, and complex shapes.
6) Improves the physical and mechanical properties of workpiece surfaces, alters the surface stress state, and enhances the lubrication conditions for mating parts.
7) Suitable for surface hardening of parts and stress relief.
8) Suitable for the renovation of old machinery parts.
9) Suitable for mold cleaning without damaging the mold surface, ensuring mold accuracy and enhancing product quality.
Technical Specifications
Sandblasting room dimensions - Custom designed and manufactured according to customer requirements.
Power Supply: AC380V, 50Hz
Milling Pump Motor, 7.5KW or 9/11KW
1 gun Handheld or pneumatic control spray gun (can be multiple)
Nozzle Diameter: 12.5mm
Gas Pressure, Displacement: 0.8～1.0 MPa, 1.5 M3/min (per gun gas consumption)
Work Pressure: Relief valve gauge pressure after startup is 0.5～0.8 MPa
Single Gun Gas Consumption: Approximately 1~1.5 M3/min (depending on gas source pressure)
Pipe Fitting Size: 13mm (hose) or G1/2" (rigid pipe)
Water Source - Industrial Potable Water
Pipe fitting size: 13mm (hose) or G1/2" (rigid pipe)
Abrasive Types Recommended: Alumina abrasives, Glass Bead abrasives
Abrasive particle size 24# to 320# glass beads or corundum sand
Abrasive Additive Amount - Add according to the ratio of abrasive fluid weight [1:5 ~ 1:7]
Wastewater Pump 0.75KW/380V, 50Hz
