Composition
This unit consists of the main cabin, dust removal unit, spray gun sandblasting system, air system, and electrical control system. (The main body is made of 2mm steel plate, with a surface coating)
Processing Applicability Range
1) Suitable for dry喷砂（media）processing.
2) Suitable for small batch processing of small parts, including pre-treatment for sandblasting on workpiece surfaces, beautification processing of handicrafts, matte rough treatment of stainless steel products, oil and rust removal from parts, and stress relief for parts.
Technical Data
Dimensions: 600(W) x 980(D) x 1650(H) mm
Work Cabin Dimensions: 580(W) x 520(D) x 600(H) mm
Cabin Door Dimensions: 340 (W) x 430 (H) mm
Barrel Size: ￠220 (diameter) x 170 (height), Load Capacity: 1.5 Kg
Overall Weight: Approximately 100 Kg Net
Power Supply: AC220V, 50Hz, approximately 0.65KW
Tub motor, AC220V, 50Hz, 90W, 13r/min
Dust Extractor Fan, AC220V, 50Hz, 0.55KW, 2800r/min
Lighting fixture, AC220V, 50Hz, 15W incandescent lamp
Control Circuit Voltage AC220V
Spray Gun - 1 Fixed Spray Gun
Nozzle Diameter: 7.5mm
Gas Source Pressure, Displacement: 0.8～1.0 MPa, 1.5 M3/min
Work Pressure: Relief valve gauge pressure after startup is 0.5~0.8 MPa
Single gun gas consumption is approximately 1~1.2 M3/min (determined by the gas source pressure)
Pipe Fitting Size: 13mm OD (hose) or G1/2" (rigid pipe)
Abrasive Types - Recommend using corundum abrasives and glass bead abrasives
Abrasive Particle Size 24# ~ 180#
Abrasive Addition: 5 Kg
