Product Description: After placing an empty pallet on the conveyor, the horizontal plate's left and right cylinder moves to lift the second bottom pallet. Then, the lifting cylinder raises to lift the second and subsequent pallets, while the bottom pallet is conveyed out. At this point, the first pallet is stacked, and the lifting cylinder descends to place the remaining pallets on the conveyor surface. The horizontal plate's left and right cylinder moves to pull out, the lifting cylinder raises to lift the second pallet, and the lifting cylinder raises again until it detaches from the bottom stack board. The conveyor starts, transporting the pallet through the conveyor line. Repeat the above actions to supply all pallets, then proceed to the next stack of pallets. Technical Parameters and Main Equipment Configuration: 1. Mechanical Dimensions: L2100*W1700*H2034mm 2. Stacking Speed: ≤3 per minute; can place 10 pallets at once 3. Power Supply: 220V/380V, 50/60Hz 4. Power Component: Taiwan Chengbang Motor 5. Sensor: Omron 6. Cylinder: Taiwan Airtac 7. Bracket: Welded steel, baked paint and plastic coating 8. Pallet Dimensions: 1100mm*840mm*130mm