The CNC machine tool steel plate shield features good sealing, preventing iron chips, coolant, and accidental tool accidents.

Durable, smooth operation, low noise, and attractive appearance.

2. Steel plate guards are suitable for protecting machine tool guideways in high-speed operations, ensuring smoothness without vibration or noise.

3. The steel plate guard not only prolongs the lifespan of the protective plate but more importantly ensures the precision of the machine tool.

4. Each section of the steel plate guard can be simultaneously pulled out parallelly and retracted parallelly, operating smoothly.

5. The steel plate guard won't cause the shield to disengage or produce a clanging sound; it's both aesthetically pleasing and enhances the lifespan of the shield.

6. An additional layer of stainless steel cover plate is added on top of the original sealed rubber strip to prevent iron shavings from burning the strip at high temperatures and scratching the track surface, thereby damaging the guide rail.

Numerical Control Machine Tool Steel Plate Guard?Advantages:

1. Each shield can be actuated simultaneously, *differing from the conventional shields that are pulled one after another, thus producing extremely low noise.

2. The protective cover of the device can extend its service life.

3. The steel plate protective cover device allows the shield to achieve a movement speed of up to 120m/min and withstand higher G-values (up to 2G).

4. The steel plate protective cover device allows the shield to move synchronously and parallelly (avoiding the drawback of the general shearing-type protective cover still having a snake-like movement).

5. It operates more smoothly at high speeds with no vibration generated.

Technical Data:

The steel telescopic guide rail guard is made of high-quality 2-3mm thick cold-rolled steel plate, and can also be made of stainless steel upon request.

The special surface polishing adds additional value. We offer corresponding guide rail protection types (horizontal, vertical, inclined, transverse) for all machine tool categories.

Our protective cover structures vary depending on the operating speed and the type of guide rail. For speeds below 10m/min, we equip them with polyamide or brass sliders.

We have roller shafts for speeds below 30m/min. Additionally, a buffer system is required between the driving plate, chip scraper, and chip suction plate.

The purpose of the slider buffer system is to reduce collisions, noise, and friction.

The number of sections for a steel telescopic guide rail protector is crucial to its proportions, weight, and operational characteristics. Each individual section should be as long as possible to minimize the number of sections and reduce costs.

Generally, the ratio of large stretch to small compression should be between 3:1 and 5:1.