TC-501F Cold & Hot Cycle Tester (High and Low Temperature Exchange Device) Product Overview:
The TC-501F Cold and Hot Cycle Tester (High and Low Temperature Exchange Device) is a new product designed for cold and hot cycling of experimental materials. It is used to measure the temperature fatigue aging properties of experimental materials, providing stable and reliable testing conditions for material testing. The tester can automatically lift experimental supplies from one temperature zone's water bath (A water bath) and place them into another temperature zone's water bath (B water bath). After reaching the set time, the supplies are returned from B water bath to the original A water bath, and this cycle is repeated. The product features an automatic counting function, allowing for repeated lifting and placement of items between temperature zone water baths within a set count range. Users can automatically set the time for the product to be in a specific temperature zone and the speed of transition between the two temperature zones. The product employs a microcomputer-based intelligent control system, full computer control, with simple operation, and is widely applicable in dental and other related scientific research departments. This product is a domestic innovation, and its introduction provides the necessary technical support for dental research. It is mainly used for research on dental materials and can also be applied in chemical industries, university laboratories, and related research and inspection institutions.
TC-501F Cold and Hot Cycle Tester (High and Low Temperature Exchange Device) Operating Principle:
The exchange between the high and low temperature baths, as well as the immersion action, are all performed by a mechanical unit. This instrument is a single-arm rotating immersion type. After the specimen is immersed in the low-temperature bath for a certain period, it is lifted above the liquid surface and automatically placed into the high-temperature bath. The sample remains in the high-temperature bath for a set duration before being automatically lifted above the liquid surface again and immersed into the low-temperature bath. This cycle is counted by the timer each time it repeats. The time interval between the specimen being lifted above the water surface and transferred from the low-temperature bath to the high-temperature bath, and then re-immersed into the water, is adjustable between 2-300 seconds (high and low temperature exchange unit).
TC-501F Cold & Hot Cycle Tester (High and Low Temperature Exchange Device) Technical Specifications:
1. Low-temperature bath temperature range: 0~100℃, temperature fluctuation: ≤±0.5℃;恒温槽temperature range: RT+5~100℃, temperature fluctuation: ≤±0.8℃. Precision: ±0.1℃, uniformity: ±0.3℃.
2. Low-temperature tank cooling power: 368W; heating power: 800W x 2 (dual tank).
3. Effective Liquid Tank Volume: ≧10L; Net Working Dimensions: 300*250*180mm.
4. Slot conversion speed adjustable range: 2-20 rpm
5. Retention time in the groove: adjustable range of 2-300 seconds (conversion time tentatively set at 30 seconds)
6. Adjustable cycle count range: 1-9999 times
7. Controller Surface: LED display, capable of controlling temperature, conversion speed, dwell time, and cycle count.
8. The conversion support stand load should not exceed 250G.
9. Dimensions for reference: 670×550×780mm.
10. The housing is made of 1.0 cold-rolled steel plate with electrostatic spraying, and the inner lining is made of 304 stainless steel.
4. TC-801F Cold and Hot Cycle Tester (High and Low Temperature Exchange Device) - Precautions:
1. During transportation, please note that the product should not be inverted or placed at an angle greater than 45°.
2. Upon arrival, the equipment should be placed flat; if the ground is uneven, it should be corrected.
Do not use the instrument in direct sunlight or in a high-temperature and humid environment. Keep the operating temperature between 10-30°C.
4. The equipment should be kept away from sources of electromagnetic interference, and the grounding wire of the equipment should be effectively grounded.
5. During normal operation, the arrangement of items within the box should not obstruct air circulation to ensure proper air flow and even temperature inside the box.
6. Power supply is AC 220V 50Hz, a 10A three-prong plug must be used, and a reliable grounding wire is required; do not use a two-prong plug at your own discretion.
7. Do not place the power cord too close to the back, and do not allow any instruments or items to press on the power cord to prevent damage.
Freight Cost Issue
Due to the unique nature of the products we sell, shipping costs to various destinations are determined based on actual circumstances. Therefore, it is advisable for buyers to confirm the actual shipping cost with our customer service before making a purchase.
We opt for regular cargo logistics for the shipment of instruments, allowing customers to pick up the items in their city or have them delivered to their doorstep, with a logistics fee applied. Customers also have the option of collecting the shipping cost upon delivery.
We strive to ship orders the same day if possible, or the next day if not.
②: Please do not place orders if you're rejecting due to the speed and service of the logistics company. We appreciate your understanding! Of course, we will try our best to choose a fast, reliable, and cost-effective logistics provider, and aim to meet your urgent needs and thoughts.
Service Commitment
All products in our store are guaranteed authentic; we offer a "fake or triple refund" policy. The instruments are well-packed before shipment, but transportation is unpredictable. Please inspect before signing for the delivery. If there's damage, refuse to sign, and we can file a claim with the logistics company. If there are minor bumps and scratches that don't affect the functionality or use of the device, and the customer agrees to accept them, then please sign for the package. We appreciate your understanding!
Rating
After receiving the goods, if you are satisfied with this transaction, please don't forget to give us a positive review. If you are not satisfied or have any comments or suggestions, please don't rate it yet and contact us immediately. We will definitely provide you with a satisfactory response.
Invoice Voucher
1. This store supports it, inquire with customer service for details.
2. Documents will be sent separately from the goods. For any other requests, please contact customer service.
3. Contact customer service after receiving the goods. Your order will be shipped via express within 2-5 business days after customer service processes it. For any other issues, please reach out to customer service.
