The HJ-iAN230BJ is a field-operational integrated optical terminal that utilizes SDH, PCM, and soft switching technologies. It features an internal card-slot design, allowing for flexible selection of various service cards according to customer needs before shipment, along with corresponding front and rear panels. This manual describes a common business combination mode.
The HJ-iAN230BJ transmission line side offers 8 SDH optical ports, with options for STM-1, STM-4, or STM-16. The service side primarily provides 1000M/100M Ethernet optical and electrical interfaces, E1 interface, FXO telephone interface, FXS telephone interface, magneto telephone interface, and trunk A interface. The 1000M/100M EOS Ethernet service bandwidth can be flexibly set within the range of 2M to 137M or 150M to 1000M, stepping at VC12 (2M) or VC4 (150M).
The HJ-iAN230BJ offers flexible networking options, allowing for various topologies such as point-to-point, point-to-multipoint, chain, and ring networks. The HJ-iAN220BJ's SDH optical port is interoperable with other manufacturers' SDH optical ports that meet relevant standards. The FXO, FXS, and MAG signaling formats are configurable, enabling compatibility with mainstream PCM products from both domestic and international markets.
The HJ-iAN230BJ offers a variety of safety protection mechanisms, including 1+1 protection for optical lines, 1+1 protection for the main control cross-bar, optical line ring network protection, 1+1 power supply protection for input power, surge protection for power supplies, static protection, vibration protection, moisture protection, and dust protection.
HJ-iAN230BJ is primarily aimed at specialized network users such as the military, police, public security, and fire departments, and has been widely used in field training, emergency support, maintaining social stability, and disaster relief operations.
Features
Chassis Dimensions: 3U height, 19 inches wide, 132×483×415 (H×W×D, in mm).
The equipment features a dustproof, moisture-proof, and shockproof housing, supporting internal card slots (users can select business cards before shipment).
SDH optical interfaces, Ethernet optical interfaces, status indicator lights, and network management interfaces are located on the front panel of the device.
Power interfaces, phone interfaces, Ethernet electrical interfaces, E1 electrical interfaces, and trunk A interfaces are located on the rear panel of the device.
The transmission line offers 8 configurable SDH optical interfaces (FC type), with the first to fourth optical ports available in 155M, 622M, or 2.5G, and the fifth to eighth optical ports available in 155M or 622M.
We can offer 8-channel unbalanced 75Ω E1 service ports.
Business-side offers 24-line telephony interfaces, with options for FXO cards, FXS cards, MAG cards, or SOM cards (SOM cards support configuring the phone ports to FXS, FXO, or MAG via network management software) before shipment.
The business side offers 4-port GE Gigabit Ethernet electrical interfaces, with individual interface bandwidths adjustable from (1~63) ×VC12 (2Mb/s to 137Mb/s) or (1~7) ×VC4 (150Mb/s to 1000Mb/s).
The business side offers 2-way GX Gigabit Ethernet optical interfaces, with individual interface bandwidth adjustable from (1~63)×VC12 (2Mb/s to 137Mb/s) or (1~7)×VC4 (150Mb/s to 1000Mb/s).
The FXS module and the MAG module both feature independent bell circuit designs, ensuring no interference and high safety.
The equipment supports SIP protocol for call control based on softswitched networks, including V5 signaling, No.7 signaling, and PRI signaling (customizable feature).
The equipment supports point-to-point, point-to-multipoint, chain, and ring network configurations, or mixed networking with other SDH equipment.
The equipment features surge and lightning protection circuitry design, supporting reverse polarity protection for power input.
The equipment is equipped with comprehensive status indicator lights, including LED status, E1 status, power status, network management connection status, Ethernet status, etc.
Configure loopback settings for 64K channels, VC12 (E1), and optical channels via network management software.
The network management software allows for error code testing on both 64K channels and VC12 (E1) channels.
Equipment is available with an optional 1+1 hot standby master control cross switch (内置).
The equipment supports both AC and DC power supplies, and features a 1+1 hot backup for power input.
The equipment supports built-in fan cooling.
The equipment provides an Ethernet management interface, enabling the management of both the equipment and the network through network management software. The primary functions of the network management software include five main modules: configuration management, resource management, alert management, performance management, and security management.
