Application: Widely used for drying raw materials in industries such as dry mixed mortar, sand, slag from cement plants, clay, coal, blends, iron powder, building materials, chemicals, and foundry.

Features:

1. The investment required for a 3-tube sand drying machine is 6/1 of imported foreign products.

2. These three-drum dryers ensure the final moisture content of the material is below 0.5%, and they are used in the production of dry-mixed砂浆and slag powder products.

3. The drum achieves self-insulation heat efficiency of over 80%, a 45% increase from the traditional single-tube dryer's 35% efficiency.

4. The three-tube sand dryer fuel can accommodate coal, oil, and gas. It is capable of drying materials such as blocks, granules, and powders less than 20mm in size.

5. The three-tube sand drier reduces the floor space by approximately 30% compared to the single-tube drier, cuts civil engineering investment by around 30%, and has an electricity consumption lower than 60%.

6. Alloy steel plates are more wear-resistant than ordinary steel plates.

7. Adjust the final moisture content to meet specific requirements.

8. Low exhaust temperatures, long lifespan of dust removal equipment.

9. These three drying machines do not require the use of large and small gears for rotation; they utilize roller wheels for movement.

10. The output temperature of the three-tube sand dryer is below 60 degrees, allowing for continuous production and packaging.

Three-tube dryer main technical parameters: Can be redesigned according to customer requirements