Hengquan Machinery Box Girder Roughening Machine, Electric Remote-Controlled Hollow Plate Roughening Machine, Bridge Facade Chiseling Machine

Sales Phone: 189-0537-7135, Manager Li

A deburring machine is a type of equipment that processes the finished surface of the main structure to ensure a strong bond between the construction surfaces of two construction stages, similar to...Zhan斧The tool for roughening. Typically, a chipping machine is used in cast-in-place concrete structures, after the casting of the slab is completed. It is used to roughen the surface for the next layer of casting, ensuring a strong bond between the concrete layers. Therefore, the "chipping machine" is also commonly referred to as the "concrete chipping machine."
Engraving Machine Application Range:
Bonding treatment for waterproofing on the deck of high-speed railway box girder (precast girder).
Chipping the concrete on the abutment sides, end faces, beam sides, and beam end faces.
Remove ground coatings, paint, and various traffic markings.
Clean and remove airport road markings, runway tire braking marks, etc., to regain a rough surface with a high coefficient of friction.
Surface treatment for 5 sets of cement asphalt road surfaces, highway bridge decks, bridge misalignments, and wear-resistant epoxy resin floors.
6 Road Microsurfacing Construction, roughening and removing the existing old pavement surface to prepare for the slurry seal.