Technical Specifications

Specs: 700×340×10mm and 1000×240×10mm

Material: High-tensile rubber and reinforced composite materials

Composition: Leakproof bags, foot pump accessories, inflation hoses, exhaust connectors, tie-down strap components

System Operating Pressure: 0.3 MPa

Inflation Time: ≤60S

Back pressure: ≤0.2 MPa

Maximum working pressure of leakage stopper package: ≤0.4 MPa

Total Equipment Weight: ≤10.5kg

Leakproof Pack Thickness: ≤15mm

Maximum working pressure of foot pump ≤ 0.5 Mpa

Application Scope: 1. Canned containers with a diameter not exceeding 2.5 meters

2. Containers with cracks not less than 240mm in length

Usage Instructions

For various leakage situations in different pipeline containers, use the corresponding inflatable external sealing rubber plug bags. These inflatable external sealing rubber plug bags can be directly inflated for sealing purposes or tied with a rope and then inflated for sealing.

1. Swivel Clamp Type: Used for leaks in large diameter pipes, tank trucks, container tanks, etc. Simply pull the swivel clamp type inflatable rubber plug sealing bag tightly over the leak surface of the pipe or container, then connect a foot-pumped air inflator to inflate the rubber plug sealing bag. The bag expands to seal the leak.

2. Bonded Usage: Leaks are sealed by compressing and then expanding. The inflatable external rubber plug is bonded and compressed above the leak hole of the pipe or container using a strap binder. Connect a foot-operated air pump to the inflatable rubber plug bag for valve inflation, and achieve the purpose of sealing the hole with expansion.