Economical epoxy resin mortar flooring coating system 

Construction Thickness:2.0mm  

Service Life:8-10 years

Performance Features:Impact-resistant and abrasion-resistant, acid and alkali-resistant, pressure-resistant and dust-proof, stain-resistant and easy to clean.

Application Scope:Various industries' cement, tiles, and terrazzo flooring coatings for dust prevention, corrosion resistance, impact resistance, and wear resistance, specifically for walkways used by forklifts over 3 tons, as well as in workshops for carts, cars, and heavy hand-pushed vehicles. Examples include: mechanical workshops, electronic factories, food processing plants, textile factories, printing plants, manufacturing workshops, office floors, parking lot floors, etc.

Technical Specifications

Drying Time (25℃): Surface dry in 12h, completely dry in 24h

Wear resistance: 500g/1000 rpm: ≤0.05g; Compression strength: MPa: ≥70

Impact Resistance: ≥70 kg/m² Adhesion (1mm scratch) Grade: ≤1

Acid Resistance: 20% HCL, 48h - Good; Alkali Resistance: 20% NaOH, 48h - Good

Hardness: Pencil hardness: ≥2H             Environmental Protection: After forming, non-toxic, odorless, and pollution-free

Construction Techniques

A. Raw Surface Treatment

B. Apply epoxy primer as an infiltration base coat

C. Scraping off the epoxy resin mortar layer

Grind down the mortar layer and clean.

E. Sanding Epoxy Putty Layer

F. Batch-dyed epoxy resin wear-resistant coating

G. High-gloss and semi-matte wear-resistant epoxy resin coating