Solvent-free epoxy self-leveling coating system with trowel finish

Construction Thickness:2-3.0mm

Service Life:10-15 years of experience

Performance Features:Seamless and smooth, aesthetically pleasing, easy to clean, mirror-like finish, dust and bacteria-resistant, acid and alkali-resistant, pressure and wear-resistant.

Application Range: Suitable for industries requiring highly clean, sterile, and dust-free coatings on cement or terrazzo floors, such as GMP-standard pharmaceutical, cosmetic, and food industries.

Microelectronics, electronic workshops, clean rooms, high-specification floor coating projects.

Technical Specifications

Drying Time (25℃): Surface dry: 12h; Through dry: 48h

Wear resistance: 500g/ 1000 rpm: ≤0.03g; Compressive strength: MPa: ≥90

Impact Resistance: ≥80 kg/m³                               Adhesion (1mm scratch) Grade: ≤1

Acid Resistance: 30% H2SO4: 48h                          Alkali Resistance: 30% NaOH: 48h  Good

Hardness: Pencil hardness: ≥3H                            Environmental Protection: Film-forming is non-toxic, odorless, and pollution-free

Construction Techniques

A. Raw Surface Treatment

B. Apply epoxy primer

C. Scraping off the epoxy resin mortar layer

Grind the mortar layer and clean

E. Sanding Epoxy Putty Layer

F. Epoxy Self-levelling Floor Paint (Glossy Mirror-like Finish)

Note: An additional 1mm thickness of epoxy mortar layer is added (quartz sand particle size 120#).