Technical Description:

1. Mattresses in "W" or "Y" shapes.

2. Specifications: 2000*900*440mm.

Product Features:

The bed frame is made of steel material, utilizing 50*50*2.0mm irregular square tubes for welding. The corners of the bed surface frame are rounded with an R57 radius. There are four horizontal beams, each made of 50*25*2.0mm square tubes, evenly spaced to ensure a beam spacing of no more than 400mm. The side panels are焊接 from 50*25*2.0mm square tubes and 1.2mm steel plates.

The bed box on one side of the bed end below the bed frame is doorless, constructed from 30*30*2.0mm square tubes and 1.2mm steel plates. The bed box measures 320mm in height and 500mm in depth, with a width matching the bed frame. The bed post fixing plate has a thickness of ≥3mm, is curved, and located on the inner sides of the bed feet, used for securing the bed structure. The fixing plate is fully welded to the bed post, ensuring a strong bond. The entire surface of the bed frame is powder coated.

The bed slats are made of kiln-dried pine solid wood, with a thickness of 20mm. The wood surface is coated with varnish for moisture and rot resistance. The laying board is a solid wood board with a smooth feel. The slats are connected to the bed frame with self-tapping screws for a secure fit. Once installed, all fasteners are flush with the bed slat surface.