BSG Series Lift Mast
The BSG series telescopic masts are lifting devices for professional mobile lighting equipment.
It mounts a telescopic mast at the top or around the equipment, vertically lifting items like lighting equipment, camera equipment, and antenna equipment to heights to achieve the client's predetermined functions, serving as a lifting device for such purposes.
BSG series telescopic masts are available in various sizes including 3.5M, 5.0M, 6.0M, 7.6M, 8.5M, 10M, 14.5M, and 17M, as per requirements. Additionally, they can be customized to meet customer specifications.
Customer's requirements for special height within 30 meters.
The BSG series telescopic masts are fixed by drilling holes in the vehicle roof or installed around the vehicle, and securely fastened with a tray and support frame. When selecting customer equipment, it should be based on different types
The original height of the BSG series telescopic masts is determined by the height from the installation surface to the top. This ensures that when the product is installed at the top, its original height is **shorter**, allowing for **greater** height clearance for the vehicle body.
To minimize the wind resistance of the equipment. The BSG series lifting masts are equipped with a**system control box. It is typically installed in locations such as next to generators, in car trunks, and so on. Control box
Control the lifting and lowering of the telescopic mast, as well as the rotation of the pan and tilt head above the mast and the on/off of lighting fixtures. The control box typically requires external interfaces for DC12V and AC220V, as well as the control system.
Handle operation.
Product Introduction
Utilizing high-strength aluminum-magnesium alloy profiles, the cylinder inner wall is sealed with a high-pressure wear-resistant vitrification process.
Select high-quality unidirectional valves, pilot-type two-position three-way solenoid valves, and other pneumatic components to ensure product quality.
High-level sealing performance, the luffing boom descends less than 10mm in 24 hours of static state. The air pump utilizes a reciprocating piston stroke inflation structure, with the heavy-duty piston made of high-strength materials.
Graphite polytetrafluoroethylene material, achieving a pressure of 10 kg and a discharge volume of 0.03 m3/s.
可选 lift rod diameters of 34cm to 23cm.
The air pump is reliable in performance, low in noise, and steady in vibration.
Additionally, our company has achieved the integration of equipment control and power lines within the lifting rod, becoming one of the earliest in the domestic market to implement internal wiring within the lifting rod, offering both aesthetic appeal and improved performance.
Step.
