Features of Stamped Flooring: High-performance colored, the raw material of stamped flooring is a colored dry powder of high polymer, a new type of high-tech colored flooring material, which can be applied to concrete surfaces to create a colorful decorative finish with high strength and wear resistance. It can also be used for decorative renovations of walls and old floors, realistically mimicking various patterns from traditional building materials like wall tiles, ceramic tiles, stone blocks, slate, and tiles. The high-performance colored stamped flooring boasts advantages such as one-time molding, diverse colors, realistic effects, and simple construction.

How to use cement embossed mold:

1. Concrete Surface Texturing: Apply a 1cm layer of cement slurry to the concrete surface before initial setting, then use a hand trowel to evenly spread and level the mortar, followed by texturing the surface.

2. Sprinkle Hardening Material: Evenly sprinkle 2/3 of the specified amount of hardener, Emei Color Cement, on the surface of the concrete in the initial setting stage. After the hardening material absorbs water and becomes moist, use a hand iron plate to level and finish the work. Once the hardening material reaches a certain stage of initial setting, proceed with the second sprinkle of 1/3 material to level and finish.

3. Leveling and Finishing Hardening Materials: Perform at least three manual iron plate leveling and finishing operations based on the concrete curing condition, with the finishing operations to be alternated.

4. Sprinkle release agent: Once the hardening material reaches a certain initial setting stage and the surface is dry with no visible moisture, evenly sprinkle a layer of release agent that matches the hardening material.

5. Mold patterns are pressed, ensuring the mold remains flat and stable. The pattern must be formed in one go without any additional pressing.

Achieve various design styles, textures, and colors.