Made from various materials such as nylon fabric, insulating film, rubber bonded cloth, oil-resistant fabric, waterproof fabric, flame-retardant fabric, high-temperature-resistant fabric, and acid/alkali-resistant fabric, we can customize products to meet different customer needs. Customers must provide: 1. The length after stretching; 2. The thickness after shrinkage; 3. The diameter of the protective part; 4. The maximum outer diameter requirement of the sheath and the connection method; 5. Technical specifications for the operating environment and material requirements. Generally, the ratio of the length after stretching to the thickness after shrinkage of the sheath is 1 meter to 15 centimeters, but we can also process and manufacture products with larger or smaller ratios according to customer requirements.
Dustproof, waterproof, oil-resistant, chemical-resistant, and non-slip, with features like resistance to iron filings, tensile strength, non-deforming under impact, corrosion resistance, and long service life. The protective sleeve is connected to the alignment flange at both ends of the protected part for a non-contact connection. The safety of the connection between the protective sleeve and the alignment flange is achieved through its inherent pre-compressed elastic force, ensuring stable operation, flexibility, and low noise during use. The surface is black and glossy, coordinating with most flange components on the machine. White screw protective sleeves can also be produced. The elongation-to-compression ratio of the sleeve is 1000:150, allowing it to expand or compress with the mechanical components. It can bend without restrictions in terms of diameter size, extension length, and connection method.
Various materials are used according to different working environments, which are first formed into disks through stamping and sewing. The two adjacent inner edges and two outer edges are stitched together, achieving good shape stability and firmness in the horizontal direction through the stitching process. It effectively protects parts such as lead screws, light bars, shafts, columns, etc., from dust and other external pollutants and damage. The circular stitched protective cover is made by stitching multiple disks together, with the two adjacent inner edges and two outer edges stitched together, ensuring good shape stability and horizontal firmness through the stitching process.
Especially suitable for protecting small particles, it can also bear the weight generated by the particles. The circular stitched protective cover can be used horizontally or vertically. When used horizontally, it is recommended to use a plastic or aluminum support ring to maintain a certain even distance between the leather chamber and the screw rod, thereby extending its service life. When the elongation length is large, a metal ring can be added at each fold to enhance the stability of the leather chamber. The connecting or fixed end is usually equipped with a metal flange, or a sleeve clamp can be chosen. Additionally, we can provide models with side openings, which can avoid the hassle of disassembling and installing for customers, more effectively improving production efficiency and saving labor and materials. Therefore, this product has been favored by an increasing number of users.
