A plate-type condenser is a novel and efficient condenser made up of a series of metal plates with a certain corrugated shape. These plates form thin rectangular channels between them, facilitating heat exchange. Plate heat exchangers are ideal for liquid-liquid and liquid-vapor heat exchange. They feature high heat exchange efficiency, minimal heat loss, compact and lightweight design, small footprint, easy installation and cleaning, wide application, and long service life. Under the same pressure drop, the footprint is one-third of that of a tubular heat exchanger, and the heat recovery rate can reach over 90%.

Plate-type condensers consist of a series of corrugated metal plates with holes for the two liquids to pass through for heat transfer. The metal plates are mounted in a frame with a fixed plate and an adjustable clamping plate on one side, and are secured with clamping bolts. Gaskets are fitted on the plates to seal the fluid passages and guide the fluid alternately into their respective channels.

Plate Heat Exchanger Specifications:

Sheet size: 604*266*0.5

Single Heat Transfer Area: 0.109㎡

Board spacing: 4mm

Single-channel cross-sectional area: 0.000758 sq. m

Treatment Capacity: 15-95 m³/h

Flange Diameter: 40DN mm

Operating Temperature: ≤180°C

Working Pressure: 0.6-1.0-1.6 MPa

Bearing Hole Diameter: 50mm

Plate heat exchangers advantages

High thermal efficiency, minimal heat loss.

Compact and lightweight structure, with minimal footprint.

.Easy to install and clean.

Widely applicable and long-lasting.