8-10m Deep Sand Extraction and Gold Recovery Equipment (with Tailings Conveying) Solution at 150-200m³/h Processing Capacity
Name | Specs | Power | Quantity | Unit Price | Total Price | Note | |
Buoyant Body | Total length: 33 meters, single width: 1.8 meters, height: 1.4 meters; panels: 4mm embossed board, base and side panels: 6mm | - | 1 set | Available for on-site processing | |||
Lift Bridge | - | 1 set | |||||
Bucket | Bucket | Bucket Model 100 | 45 | 1 set | Chain: 106 pieces, 73KG/piece, single thickness 5CM, total thickness 15CM | ||
Chain | Material: Cast Steel | ||||||
Bicep | 20 meters in length, two sections | ||||||
Submerged five-point wheel | |||||||
Waterproof four corner wheels | |||||||
Bracket | Material: 20#H Steel | ||||||
Power System | Model: 1000# Gearbox | ||||||
Screw Sieve | Trommel screen | 1.3m internal diameter, 1.6m external diameter | 15 | 1 set | |||
Hopper | The hopper is made of 8mm plate. | ||||||
Bracket | The bracket is made of 15# square tube. | ||||||
Waste Material Conveyer | 5.5 | 1 set | |||||
Vibrating chute | 2.2KW | 1 unit | |||||
Large arm winch | 15 | 1 unit | |||||
Master Anchor | 5.5 | 1 unit | |||||
Sub-anchor | 3KW*4 | 4 units | |||||
Pump | 7.5 | 2 units | |||||
Sediment Pump | 6-inch | 22KW | 1 set | ||||
Centrifuge | 1200# Horizontal Fully Automatic Ore Discharging Machine | 21.5 | 1 set | PLC Computer Control | |||
Centrifugal Pump | 5.5 | 1 unit | |||||
Sand Pump & Pump Housing | Centrifuge feed, 4-inch | 11 | 1 set | ||||
Pump Storage | 6 meters long | 1 set | |||||
Diesel Pump Set | Diesel Engine 6100, Pump: 8 In, 6 Out | 1 set | |||||
Total Power | 167.7KW | ||||||
Factory Price | Gold Prospecting Ship Price - Please Call for Details (Includes diesel engine, excludes generator set, taxes, and shipping fees) | ||||||
The gold selection system employs a horizontal fully automatic ore centrifuge plus a vibrating chute for gold separation. The gold felt uses imported Mitsubishi brand from Japan, ensuring longevity and recovery rates; the centrifuge utilizes a 1200# horizontal fully automatic ore centrifuge, which is controlled by a PLC computer and offers the following advantages compared to vertical centrifuges:
Horizontal Automatic Ore Centrifuge | Vertical manual ore centrifuge | |
Control Method | PLC Computer Full Automatic Control | Manual human control |
Mining method | Automatic | Manual |
Rotor structure | Horizontal (fixed at both ends) | Vertical (bottom-fixed) |
Stability | High (High lifespan) | Low (Low lifespan) |
Installation Method | No need for horizontal hardening foundation | Level hardening foundation |
Supply Method | Sand Pump (controls feed concentration to 30%) | Gravity flow (cannot control feedstock concentration) |
Recycling Rate | Over 90% | 70% |
For mobile devices | Certainly | No |
Large size | 1200# and above (Custom order required) | 80# |
Our gold panning equipment is made with ample materials; we do not use cheap, low-quality steel. Each set of gold panning equipment is supported by engineering drawings, ensuring accuracy throughout the production process.
