Sandy Gold Equipment - Gold Pan, 6S Shaking Table Technical Specifications:
Name | Unit | Crude ore deposit surface | Fine sand bed surface | Mineral mud bed surface | |
Mattress Size | Length | mm | 4450 | 4450 | 4450 |
Transmission End Width | mm | 1855 | 1855 | 1855 | |
Refined ore width | mm | 1546 | 1546 | 1546 | |
Large particle count | mm | 2 | 0.5 | 0.15 | |
Provide ore quantity | t/d | 30-60 | 10-20 | 15-25 | |
Mineral concentration | % | 25-30 | 20-25 | 15-25 | |
Itinerary | mm | 1.6-2.2 | 11-16 | 8-16 | |
Frequency | f | 45-48 | 18-53 | 50-57 | |
Bed surface cleaning water volume | t/d | 80-150 | 30-60 | 10-17 | |
Bed surface lateral slope | Degree | 2°30-4°30 | 1°30-3°30 | 1°-2° | |
Bed surface longitudinal slope | Degree | 1.4 | 0.92 | ------ | |
Bed surface acute angle | Degree | 32°-42° | 40° | 42° | |
Mining Area | cubic meters | 7.6 | 7.6 | 7.6 | |
Bed length ratio | 2.6 | 2.6 | 2.6 | ||
Bed surface cross-sectional shape | Rectangle | Razor-sharp | Triangle | ||
Motor Power | Kw | 1.1 | 1.1 | 1.1 | |
Transmission Mechanism | Off-centering linkage mechanism | ||||
The 6S Shaking Table is available in two types: right-angled and left-angled, depending on the ore feeding area. The feeding position for the right-angled shaking table is on the right side for the shaking mechanism, whereas for the left-angled table, it is on the left.
Gold Sand Equipment - Gold Shaking Tables, the 6S Shaking Tables are one of the main gravity separation equipment in gold sand beneficiation, widely used for separating tungsten, tin, tantalum, niobium, iron, manganese, chromium, titanium, bismuth, lead, and gold, as well as other rare and precious metals and ore, and can also be used for coal mines. Suitable for roughing, concentrating, and scavenging operations, it can separate coarse sand (2-0.5mm), fine sand (0.5-0.074mm), and mud (-0.074) into different grain sizes. It can also be used for separating iron, manganese ore, and coal. When processing tungsten, tin ore, etc., the effective recovery particle size range of the shaking table is 2-0.22mm.
Mineral Separation Shaking Table
Gold Separation Equipment - Gold Shaking Table; The mineral separation process of the 6S shaking table is conducted on an inclined bed surface with riffles. The mineral particle group is fed into the bed from the feed trough at the corner of the bed, while horizontal flushing water is supplied by the water supply trough. As a result, under the action of gravity, the force of the horizontal water flow, the reciprocating and asymmetric motion of the bed surface, and the inertia and friction, the particles are stratified according to their specific gravity and particle size, and move longitudinally along the bed surface and laterally along the inclined bed surface. Therefore, particles of different specific gravity and particle size gradually flow in a fan shape from the A side to the B side along their respective movement directions, and are discharged from different zones at the concentrate end and tailings side, subsequently separated into concentrate, middlings, and tailings.
