Φ152×113mmPP Spunbond Filter Cartridge, Φ152×113mm mmPP Spunbond Filter Cartridge Manufacturer, Φ152×113mm mmPP Spunbond Filter Cartridge Price, Φ152×113mm mmPP Spunbond Filter Cartridge Wholesale

PP melt-blown filter cores are tubular filter elements made from odorless and non-toxic polypropylene particles, formed through a process of heating, melting, spinning, drawing, and accepting shaping. They feature high filtration accuracy, large flow rate, low pressure drop, high dirt-holding capacity, compact size, high pressure resistance, and corrosion resistance.

High filtration accuracy, stringent production process, and unique fiber structure ensure stable and reliable product quality.
(2) High filtration capacity with minimal pressure loss; fibers self-adhere through heat, without the use of adhesives, reducing pressure loss and increasing filtration flow.
(3) Long service life and low filtration cost; the product structure is tight inside and loose outside, allowing for a large amount of dirt absorption, thereby extending the lifespan of the filter core.
(4) Strong corrosion resistance, wide applicability
(5) 30 tons of water treatment capacity, recommended to replace every 7 months.

Large Fat PP Cotton Filter Cartridge Overview and Features:
1> The PP meltblown filter core is made from fibers produced from polypropylene resin, which are then wrapped and bonded together. The core features an outer layer of coarse fibers, an inner layer of fine fibers, with a gradient structure that becomes tighter from the outside to the inside. This unique gradient deep filtration creates a three-dimensional filter cake effect, boasting high porosity, high retention rate, large dirt-holding capacity, high flow rate, and low pressure drop.
2> The large-fat PP meltblown filter cores have dense and uniform pore sizes, offering high filtration efficiency. Due to the bridging phenomenon of particles in the PP meltblown filter core channels, particles smaller than the channel size can also be blocked, achieving a filtration efficiency above 98%. The PP meltblown filter cores have a high degree of cleanliness and do not contaminate water quality. They are resistant to corrosion from acidic, alkaline chemicals and organic solvents. The PP meltblown filter cores are strong, remaining deformation-free even when the pressure difference between the filter's inlet and outlet is 0.2 Mpa.

Φ152×113MMPP Spunbond Filter Cartridge, Φ152×113mm MMPP Spunbond Filter Cartridge Manufacturer, Φ152×113mm MMPP Spunbond Filter Cartridge Price, Φ152×113mm MMPP Spunbond Filter Cartridge Wholesale