Electrically adjustable fiber filter
Electric modulated fiber filter
One. IntroductionBrief Introduction
Electrically adjustable fiber filter, consisting of a tank, fixed and movable orifice plates installed within the tank, and several fiber bundles connected to both the fixed and movable orifice plates at each end. The movable orifice plate is equipped with a lifting rod, which is connected to a drive unit located outside the tank. The compression and relaxation of the fiber filter layer are achieved by raising or lowering the drive unit, thereby accomplishing the purpose of filtering water.
The electrically adjustable fibre filter is composed of a can body, a fixed orifice plate and a movable orifice plate in the can body, and a number of fiber bundles respectively connected to the fixed orifice plate and the movable orifice plate. The movable orifice plate is connected with a lifting rod, which is connected with a driving device arranged outside the tank body. Through the rising ｏｒ falling of the driving device, the compression and relaxation of the fiber filter layer can be realized, so as to achieve the purpose of water filtration.
Our electrically adjustable fiber filters ensure the integrity of the fiber bundle during operation, prevent the tilting of the lifting rod, and guarantee reliable operation and long service life of the drive unit and lifting rod. Additionally, the lifting rod is securely connected to the movable plate, showcasing its outstanding advantages.
The electric adjusting type fiber filter produced by our company can guarantee the fiber bundle intact, prevent the lifting rod from tilting, make the driving device and the lifting rod work reliably and have a long service life, and the lifting rod is firmly connected with the movable orifice plate, etc.
Additionally, our company has also made corresponding improvements to the outlet device of the electrically adjustable fiber bundle filter, enhancing the operating cycle and the water yield per cycle of the electrically adjustable fiber filter.
At the same time, our company has made a corresponding improvement to the water outlet device of the electric adjustable fiber bundle filter, improving the operation period and the periodic water production of the electrically adjustable fiber filter.
Electro-adjustable fiber bundle filters utilize specially treated anti-pollution fiber bundle filter media, thereby achieving excellent cleaning results while effectively extending the operational cycle.
The electric adjustable fiber bundle filter adopts anti-pollution fiber bundle filter material after special treatment, so it can obtain good cleaning effect and prolong the operating cycle.
In conjunction with our company's provided operational sequence, the electrically adjustable fiber filter can be conveniently automated for operation.
Combined with the operation sequence provided by our company, the electric regulating type fiber filter can be easily realized automatic operation.
Two. Electrically adjustable fiber filter specification performance tableelectric adjusting type fiber filter specification table
Equipment Specifications and Model model number | EAF800 | EAF1000 | EAF1500 | EAF2000 | EAF2500 | EAF3000 |
Equipment Diameter (:)mm） Equipment diameter | 800 | 1000 | 1500 | 2000 | 2500 | 3000 |
Trafficm3/h） maximum flow | 15 | 20 | 49 | 91 | 149 | 210 |
Filtering Aream2） the filter area | 0.5 | 0.78 | 1.77 | 3.14 | 4.9 | 7.06 |
Filtering Speedm/h） filtration velocity | 20～30 | |||||
Filter Layer Heightm） filter layer height | / | |||||
Operating PressureMpa） operating pressure | 0.6 | |||||
Flow Clogging Capacitykg/m3） sewage removal capacity | 10～15 | |||||
Pre-filter Water Quality pre-filtration water quality | Suspended Solids suspended solids（mg/L） | 20 | ||||
Turbidity turbidity（NTU） | 20 | |||||
Filtered Water Quality filtered water quality | Suspended Solids suspended solids（mg/L） | ≤2 | ||||
Turbidity turbidity（NTU） | ≤2 | |||||
Equipment Reference Weight:≈t） reference weight of equipment | 1.6 | 3.0 | 4.2 | 5.8 | 7.3 | 9.5 |
Note: The equipment specifications in the table are for reference only, and the actual specifications should be based on the signed design drawings by both parties. Note: the equipment specifications in the table are for reference only, and shall be subject to the design drawing signed by both parties. For detailed information, please contact our company for acquisition. Please contact us for further information. | ||||||
