A new, high-efficiency composite fluorspar powder adhesive, a novel type of fluorspar bonding material, boasts significant technological advantages over existing technology:
1High mechanical strength:Utilizing its produced fluorite agglomerates, compressive strength can reach80—100pound/Ball(Also available in higher strengths to meet customer requirements)And the cold strength of the fluorspar pellets processed by the existing technology is merely50kgRoughly speaking, some even...30kgNo, there are often a large number of broken pieces during storage and transportation.
2Excellent waterproof performance:Moisture and water-resistant; long-term storage will not become loose due to oxidation and moisture; can remain intact in water for days or even months; whereas the fluorite pellets processed by existing technology do not have this moisture and water-resistant feature. Once the pellets absorb moisture, they can become crumbly and break, often disintegrating within minutes, even seconds, in water, turning clear water into muddy water.
3Ash content does not increase:This technology ingeniously uses inexpensive materials, adding them to the萤石球团 to minimally or essentially not increase the ash content of the pellets. Even if there is a slight increase, it is beneficial to steelmaking with no drawbacks. In contrast, existing technologies add a significant amount of sticky inorganic substances to enhance pellet strength, leading to a substantial increase in ash content and a decline in the quality of the pellets.5%Above, and even more.
4Adhesives at affordable prices:This adhesive composition is scientifically and reasonably formulated, resulting in a lower cost for the adhesive. Generally, the cost to produce one ton of fluorspar is only70~80About RMB 100, even for difficult-to-adhere fluorspar powder100About RMB. With the existing technology, bonding one ton of fluorspar pellets (with equal strength) generally requires120~130Yuan, some even as high as150Please provide the Chinese content you would like to have translated.
Due to long-term mining, high-grade natural fluorite, which is essential for steelmaking, is in short supply in the market. The mining resources have been overexploited, and the production volume cannot meet the needs of the smelting industry. Meanwhile, a large amount of low-grade fluorite ore cannot be used in steelmaking, resulting in a waste of these resources. Therefore, the development and granulation of fluorite powder hold great promise!
