Cautionary notes for lightweight partition boards:
1. Prior to installation, it's essential to establish the level line and vertical control points to ensure subsequent construction is level, firm, and stable. Additionally, ensure the distance between the frame and embedded parts is within the standard range; if using expansion bolts for connection, consider their suitability as well. 2. Select the appropriate size specifications based on design requirements. 3. Leave sufficient gap widths between different materials (e.g., staggered joints) to prevent wall deformation due to load differences, which may affect later normal usage. 4. Try to avoid cutting through the entire body; if it's necessary, have personnel operate or obtain a certificate of approval after special technical treatment before use, and follow the instructions. (This helps prevent irregular cracks.) 5. Thoroughly clean the dust at the jointing area (and rinse with water if necessary), and ensure moisture is evaporated before applying the adhesive work. (This benefits the performance of the adhesive mortar.) 6. Pay attention to product protection and maintenance (no撞击 on completed walls). In case of any issues, take timely corrective measures to repair and improve (to ensure it does not affect the quality of workmanship). This covers all there is to know about lightweight composite thermal insulation boards. Hope this information is helpful!