Flood control and emergency rescue pile driving machine specifications:
Rated Pressure: 0.4 MPa to 0.8 MPa
Impulse Frequency: ≥45 times/min
Applicable Pile Diameter: ≤200mm
Pile Hammer Stroke: 140mm
Gas Consumption: 3.8 x 10 cm³/min
Operating Temperature: -5℃ to 60℃
Piling Machine Main Engine
1. Structural Form: Frequency-modulated Vibration Shock
2. Impact Energy: 110.46 N·m
3. Main Unit Weight: 74Kg, Flexible Shaft Length: 4m
Piling Machine Operating Parameters:
1. Target Area: River, Lake, Pond, and Embankments (Uniform Soil)
2. Piling diameter: 60-120mm
3. Length: ≤ 3000mm
4. Piling Speed: 500-1000mm/min
Piling Machine Power Unit:
Diesel Engine Model: 175R
Power: 4.85 kW
Clutch engagement speed: 1200 rpm
Total Power Unit Weight: 73 kg
Piling Machine Operation Instructions
1. Vertically insert piles (wooden piles and steel rods) into the ground where piling is required.
2. Use 1-2 people to lift and place the pneumatic pile driver on top of the pile. Tighten the three fixed screws of the lower pile clamp, and adjust the pile size with the adjustment bolts.
3. Connect the rubber hose to the pile driver and the air source.
4. Vertically support the pile driver, flip the switch to the ON position, and the pneumatic pile driver will begin continuous operation.
5. Once the pile reaches the required depth, turn the switch to the off position, and the pile driving operation is complete.
The flood control and emergency rescue pile driver consists of three parts: a power source, an exciter, and a transmission flexible shaft connecting the power source and the exciter. It is compact, lightweight, easy to operate, highly mobile, and not restricted by power supply environments. It can be used for both vertical and inclined pile driving. The manual pile driving operation has low labor intensity and high efficiency, replacing manual pile driving methods and achieving mechanization in flood control and emergency rescue pile driving.
Portable flood control and emergency piling machine applications: Plugging breaches in embankments, wave protection, emergency protection against embankment collapses, and strengthening embankments. Used for flood control and emergency rescue during the flood season, as well as for embankment reinforcement and maintenance before and after the flood season. Piling machinery for river, lake, and embankment embankments. Can replace manual compaction methods, reduce manual labor, and improve piling efficiency, making flood control and emergency piling mechanized.
