XQI series, XQII series inclined slot high-pressure centrifugal fan
XQ ITypeXQ IIType H high-pressure centrifugal fan is specifically designed as a chute fan for cement kiln systems. It can also be used as a blowing fan for various iron furnaces, melting furnaces, and forging furnaces. It is also suitable for conveying air and gases that are non-corrosive, non-spontaneously combustible, and free from sticky substances. The conveying medium temperature does not exceed80℃The dust and hard particles contained in the medium are not significant.150mg/m3。
XQ IStyleXQ IIType Slant Channel High Pressure Centrifugal Fan - Main ParametersMain Parameter | ||||||
Model | Engine Number | RPM | Traffic | Full Pressure | Motor | |
Model | Power | |||||
XQ | 4.8A | 2840 | 232 | 5028 | Y801-2 | 0.75 |
325 | 5269 | Y802-2 | 1.1 | |||
418 | 5422 | Y90S-2 | 1.5 | |||
511 | 5466 | Y90S-2 | 1.5 | |||
604 | 5419 | Y90L-2 | 2.2 | |||
697 | 5226 | Y90L-2 | 2.2 | |||
790 | 5082 | Y100L-2 | 3.0 | |||
883 | 4828 | Y100L-2 | 3.0 | |||
XQ I | 5.4A | 2840 | 330 | 6363 | Y90S-2 | 2.5 |
463 | 6669 | Y90L-2 | 2.2 | |||
595 | 6862 | Y90L-2 | 2.2 | |||
727.5 | 6918 | Y100L-2 | 3 | |||
860 | 6858 | Y100L-2 | 3 | |||
992 | 6690 | Y112M-2 | 4 | |||
1125 | 6422 | Y112M-2 | 4 | |||
1257 | 6110 | Y123S1-2 | 5.5 | |||
XQ ll | 4.7A | 2840 | 585 | 5187 | Y90S-2 | 1.5 |
747 | 5287 | Y90L-2 | 2.2 | |||
908 | 5416 | Y90L-2 | 2.2 | |||
1069 | 5469 | Y100L-2 | 3.0 | |||
1231 | 5416 | Y100L-2 | 3.O | |||
1392 | 5351 | Y112M-2 | 4.0 | |||
1551 | 5187 | Y112M-2 | 4.0 | |||
