Product Introduction:
Product Name: Large Electric Power Battery Vacuum Box (Custom sizes and dimensions available upon customer request!)
Product Brand: HONGJUN/Hongjun
Product Models: HJ/CQ-100ZKX, HJ/CQ-150ZKX, HJ/CQ-800ZKX, HJ/CQ-1000ZKX
Hongjun Factory can customize products according to customer's specifications and sizes!
One, Specifications of Large Electric Power Battery Vacuum Box:
1. Internal dimensions: 1000 (width) × 1000 (depth) × 1000 (height) mm (Custom sizes available!)
2. External dimensions approx.: 1355 (width) × 1705 (depth) × 1855 (height) mm, actual item measurement applies.
3. Control Panel: The control panel is located at the top of the machine (as shown in the figure).
4. Door Opening: Single door opens from right to left.
5. Dividers: Internally divided into four layers, with a bottom layer starting at 50mm, evenly distributing the remaining layers above, and including four divider panels.
6. No visual window on the door; (as shown in the image)
7. Seal materials include: high-temperature-resistant silicone strips.
8. The cabinet structure consists of: the lower section being the product chamber, and the upper section for the installation of the electrical control box.
9. Vacuum Pump Installation: The vacuum pump is mounted on the rear of the machine.
10. Inner box material: High-temperature-resistant SUS316# stainless steel industrial plate, with a thickness of 5.0mm, reinforced treatment for vacuuming without deformation.
11. Outer Carton Material: 1.2mm thick cold-rolled steel plate, double-sided baked paint finish (米白色) - Milky white.
12. Insulation Material: Fiber rock wool used for excellent thermal insulation, thickness of 100mm.
13. Equipment Operating Environment: Operating temperature 5 to 25°C, operating humidity 35% to 75%.
14. The machine base is equipped with adjustable swivel casters and adjustable fixed foot cups.
15. For detailed technical information, please contact Dongguan Hongjun Instrument Equipment Co., Ltd. at our wealth hotline: 138-2697-1056 for more details.
Large electric power battery vacuum box temperature control system:
1. The temperature controller is a digital display instrument (Taishong Instrument), featuring single-point temperature control, automatic calculation, simultaneous display of PV/SV, and key setting.
2. Timer Function: 0-9999 hours/minutes/seconds, temperature to countdown, heating stops upon time completion, with an alarm prompt.
3. The thermocouple wire is of type (K).
Output: 3-32V
5. Current controller: SSR solid-state relay
6. Heating Method: Tri-side radiant heating (left, right, and bottom sides of the inner box wall)
7. Heating element: High-temperature-resistant stainless steel heating tube.
8. Temperature Range: adjustable from room temperature +25 to 250℃.
9. Instrument Control Accuracy: ±0.5℃
10. Instrument Accuracy Display: 0.1℃
11. Inside box temperature deviation: ±6℃ (no-load test).
Section 3: Large Electric Power Battery Vacuum Box Vacuum System
1. The machine utilizes high-density silicone sealing strips for door sealing, ensuring excellent overall sealing performance.
2. Utilize a Panasonic digital vacuum gauge to display the vacuum level inside the box.
3. The vacuum sensor is: pressure sensor.
4. Vacuum Range: 0.0KPa to -100.0KPa
5. Vacuum Preservation Pressure Leak Rate: Approximately 1.0 KPa per hour.
6. The vacuum control method is automatic, stopping at the upper limit, starting below the lower limit, and maintaining vacuum degree through cyclic operation.
8. Vacuum requirements: Vacuum first before heating; it is prohibited to vacuum after the internal temperature of the box exceeds 80 degrees.
9. Pressure Relief Method: Utilizes an electromagnetic valve for control; manual pressure relief is required when pressure relief is needed.
10. Vacuum Tube: 304# stainless steel KF25 high-vacuum corrugated tube with clamp;
11. Vacuum Control Valve: Utilizing KF25 flanged high vacuum differential pressure valve (as shown in the figure).
12. Vacuum Pump Configuration: Goodkade RH0063 Single Stage Vacuum Pump, Power 380V/2.2KW. (As shown in the figure)
Four: Large Electric Power Battery Vacuum Box Protection System
Over-temperature Protection System: Automatically shuts off heating power when the temperature exceeds the set over-temperature protection limit, ensuring the safety of both the product and the machine.
2. Circuit Protection Systems: Grounding protection, quick fuse, phase loss protection, overload protection, circuit breakers, etc.
V. Large Power Battery Vacuum Box Machine Power Supply:
1. Voltage: 380V/50Hz, three-phase five-wire system
2. Current: 27A
3. Total Power: 18.0 kW
4. For details, please contact Dongguan Hongjun Instrument Equipment Co., Ltd.
