Product Name: Small Countersunk Threaded Socket Cap Screws - Stainless Steel

Standard: GB/T17880.2-1999

Material: SUS304 stainless steel

Surface Treatment: Cleaning and Passivation

Customizable: Yes

Product Features: The countersunk rivet nut is an improved version of the standard countersunk rivet nut and does not require a countersunk hole, allowing for reduced or zero gap between two workpieces.

Product Advantages:

Boltnuts can be assembled freely in plastic parts, ceramics, and all metal components.

2. Can be riveted from one side; suitable for assembling hollow frames, shells, tubes, or enclosed spaces.

3. Even if the workpiece surface has already been plated or treated, rivet nuts and rivet bolts can still be used to install at any stage during the production process, and surface treatment is not required upon completion of the installation.

4. Unlike welding nuts, rivet nuts and rivet bolts do not cause damage to workpieces due to high temperatures, nor do they produce harmful gases or pose a fire hazard, ensuring the safety of producers.

5. Quick installation, low cost, with significant economic advantages

6. Performance exceeds welding nuts, self-tapping screws, traditional nuts, and bolts

Installation Method: We recommend using the "rotate-torque-rotate" method as shown in the diagram. During installation, the rivet nut and rivet bolt are threaded onto the tool screw, inserted into the installation hole, then the rivet nut is deformed by the torque-tensioning, and finally, the rivet nut is removed.