1、 Product Features and Applications

The plastic encapsulated silica gel for plant specimens is a low viscosity gel like transparent two-component addition molding organic silicon gel, which can be cured at room temperature or by heating, with the characteristics that the higher the temperature, the faster the curing. This product does not produce any by-products during the curing reaction and is suitable for plastic sealing of plant specimens, animal specimens, simulated bonsai infusion, simulated food and beverage, etc.

2、 Typical use

-Transparent sealing of plant specimens

-Animal specimen packaging

-Transparent packaging of simulated bonsai

-Packaging of simulated food and beverage ornaments

3、 Usage process:

Before mixing, mix component A and component B thoroughly in their respective containers.

When mixing, a weight ratio of 1:1 between component A and component B should be followed.

F-N840 can be defoamed as needed during use. After stirring the mixture of A and B evenly, it can be placed in a vacuum container and defoamed at 0.08MPa for 5 minutes before being poured for use.

4. The corresponding curing time should be maintained above the temperature given in the technical parameter table before and after curing. If the application thickness is thick, the curing time may exceed. It can be cured at room temperature or by heating. The curing speed of glue is affected by the curing temperature, and it takes a long time to cure in winter. It is recommended to use heating method for curing, curing at 80-100 ℃ for 20 minutes, and curing at room temperature generally takes about 8 hours.