Wuhan scrap iron recycling: Always keep these points in mind

Iron Recycling and Magnetic Separation

For recycled solid waste, such as scrap iron cans of different materials, the general method is magnetic separation. Magnetic separation is a treatment method that utilizes the magnetic differences of various substances in solid waste to classify uneven magnetic particles. After the solid waste is fed into the magnetic separator, Wuhan Scrap Iron Recycling, the magnetic particles are magnetized under the action of uneven magnetic fields, thereby being attracted by the magnetic field, causing them to be drawn into the cylinder and discharged. Non-magnetic particles, due to the small force applied by the magnetic field, remain in the waste. The magnetic field sources used for magnetic separation are typically electromagnets or permanent magnets.

Section II: Preliminary and Deep Cleaning by Chemical Method for Scrap Iron Recycling Utilization

Scrap iron recycling involves cleaning oil, rust, mud, and sand from the scrap iron, typically using various chemical solvents or hot surfactants. It's commonly used for large-scale cleaning of engines, bearings, gears, and other components contaminated with cutting oil, grease, dirt, or other adhesives. The application of initial and deep cleaning chemical techniques is not overly complex and is relatively effective. By selecting different cleaning agent formulas, surface cleaning can be achieved for different types of scrap iron. After disassembling the scrap iron equipment, deep cleaning can be performed, generally reaching the predetermined cleaning objectives. However, initial and deep cleaning chemical techniques cannot address bulk contamination removal, and their effectiveness is not ideal for objects with complex geometries.

Additionally, this decontamination technique cannot remove radioactive substances from the gaps in scrap iron, which is a common occurrence. The preliminary deep surface decontamination using chemical methods requires various chemical agents, which may produce smoke during the process. This is due to the strong corrosiveness and toxicity of these chemicals, posing relative instability to the operators, and the discharge of wastewater may pose potential hazards to the environment.

Magnetic separation in scrap iron recycling

For recycled solid waste, such as scrap iron drums of different materials, the general method is magnetic separation. Magnetic separation is a treatment method that utilizes the magnetic differences of various substances in solid waste to classify uneven magnetic particles. After the solid waste is input into the magnetic separator, the magnetic particles are magnetized under the action of uneven magnetic fields, allowing the scrap iron to be recovered, and are thus attracted by the magnetic field, pulled into the cylinder, and discharged into it. Non-magnetic particles, due to the small force exerted on them by the magnetic field, remain in the waste. The magnetic field sources used for magnetic separation are typically electromagnets or permanent magnets.

As China's economic growth accelerates, the demand for non-ferrous metals is also on the rise. To prevent a shortage of metal resources, it's crucial to pay attention to the development of Wuhan Scrap Iron Recycling Companies. Everyone should contribute to the industry by not arbitrarily disposing of scrap iron in daily life, production, and work. Instead, it should be handed over to specialized recycling agencies for proper disposal.

Even for scrap iron with no application value, it must be processed through Wuhan Scrap Iron Recycling Co., as it can be destroyed properly to avoid environmental pollution. Although it has no usable value, it helps reasonably prevent environmental pollution, contributing to the environmental protection of our home!

Construction Waste Iron Recycling - Wuhan Waste Iron Recycling - Longli Recycled Resources Recovery is provided by Wuhan Longli Recycled Resources Co., Ltd. Wuhan Longli Recycled Resources Co., Ltd. is a company specializing in "waste copper recycling, waste iron recycling, waste aluminum recycling, and wire and cable recycling." Since its establishment, we have adhered to the policy of "honesty as the foundation, and stable operation," bravely participating in the positive market competition, which has earned the "Longli" brand a good reputation. We uphold the principle of "customer service first, user first," enabling Longli Recycled Resources Recovery to gain clients' trust and establish a favorable corporate image in waste recycling and reuse. Special Note: The images and information provided here are for reference only. Please contact us for accurate information, thank you!