I. Product Performance
1、PEPlastic storage tanks are formed using rotational molding technology.
2Our plastic storage tanks are made from imported extrusion blow molding specialty material.——Linear Low-Density Polyethylene (LLDPE)LLDPELinear Low-Density Polyethylene (LLDPE)LMDPEIt can contain most inorganic acids, bases, salts, and many organic substances at room temperature.
3The softening point of the plastic used is:108℃Fragmentation point-70℃Generally, suitable for containing temperatures.-40℃Please provide the Chinese content you would like translated into American English.70℃Liquid. If the temperature of the liquid contained is above70℃When in use, a metal reinforcing sleeve should be installed to prevent the tank from softening and deforming. If the tank is used for chemical reactions or dilution, corresponding tests should be conducted in advance to determine the reaction or dilution temperature.
4Components are configured according to the usage provided by the customer.PP、PVC、ABSConnectorPP、PVC、PEFlanges are available for selection. When containing acidic or alkaline substances, proper configuration is required.PVC、PPOrPEAccessories and acid/alkali-resistant gaskets. For containing organic materials (organic solvents)    At that time, install non-dissolvable rubber washers.
5This product is not suitable for containing strong oxidizing agents (such as those at high temperatures)60℃At that time, concentration50%The concentrated sulfuric acid above,30%Above mentioned concentrated nitric acid, etc., and excellent organic solvents, etc.

6Other products include:PEFood drum, food box drum, biogas digester drum, turnover box, and other plastic container products. Free gift provided50And below connectors2Piece, free installation fittings. Products can be opened and processed according to customer requirements. Out-of-province and city areas can arrange for shipping or return transport.

7Our company specializes in manufacturing large-scale plastic containers of various types, with a complete production process and one-time molding. Our products include:PETanks, chemical storage tanks, mixing drums, transport tanks, drums, and boxesPECustom-shaped machining services.

8Nanning Tianyi specializes in manufacturing large and complex-shaped plastic products, being a private technology enterprise that integrates scientific research, development, production, sales, and service.

9If unsure about the suitability for containing a certain substance, please consult our company promptly or refer to the website.

                                                                                                                      
II. Installation and Usage Instructions
1、 The foundation for installing the storage tank must be level and capable of withstanding the corresponding pressure. If a steel structure is used, the gaps should not be too large, and wooden or iron plates should be laid on top.
2、 Tanks storing chemicals should be equipped with a well-designed drainage trench and dilution system around the facility.
3、 Due to the unavoidable bulging of the tank's bottom during molding into a spherical shape, the foundation must be made into a similar spherical shape (it is recommended to use sand to form a spherical shape corresponding to the tank's bottom on a level foundation).
4、 Large-scale storage tanks must be installed with safety in mind, preferably using a crane. If unsure of the method, please contact us.
5、 Plastic connectors are tightened at the factory, but they may loosen during transportation and handling. Therefore, it is essential to inspect the connector's sealing performance before use. You can add liquid above the connector to check for leaks. For storage tanks containing chemical liquids, first test for leaks with water to prevent significant losses.
6、 Tubes connected to the bottom joints or flanges of the tank must be perpendicular to the barrel wall, utilizing flexible connections to prevent uneven expansion of the barrel wall from top to bottom upon filling with liquid, which could damage the joint and cause leakage. In severe cases, it may even damage the joint and the barrel itself.
7、 When the inlet is higher from the bottom of the tank, the inlet should bend towards the tank wall to allow the liquid to flow down along the wall, reducing the impact on the bottom.
8、 Large-capacity storage tank20Above cubic meters, metal reinforcing sleeves can be used to limit the expansion and deformation of the drum at the joint, thereby preventing cracking at the hole.
9、 When installing heavier accessories such as mixers on drums, or when personnel need to work on the drum top but the top cannot bear their weight, please set up a platform or a ladder, and pay attention to safety during the operation.
10In the event that the liquid level cannot be controlled, an overflow port should be installed to prevent the liquid from spilling out through the manhole, causing unnecessary harm.
11When the inflow and outflow fluid flow rates are high, a corresponding exhaust pipe should be installed.
12Please contact our company again when changing the container for liquid.

Section 3: Main Products

Nanning Tianyi's main products include:PETanks, plastic tanks, chemical tanks, corrosion-resistant tanks, plastic water towers, cone-bottom drums, plastic round drums, plastic square boxes, dosing boxes, floatation boxes, collision-resistant barrels, water-filled barriers, pickling tank processing, steel-lined plastic products, plastic containers,PPPlate welding, transportation tank welding, and processing of various non-standard parts.

。