I. Product Overview:
The A3NF-B series pedestal lubricating oil pump is a three-axis flow, single-channel self-priming general-purpose pressure volumetric pump, suitable for conveying media with low wear and corrosion, both low and high viscosity, and low to high lubricity.
Part II: Product Usage and Features
1. Conveying lubrication, circulation cooling, filtration, and sealing
2. Fuel pressure atomizing ignition spray feeding
3. Hydrostatic Test Drive Lift Braking Control
4. Inverted flow conveyance, loading and unloading, oil extraction, and shipment supply
5. Long-distance multiphase mixed transportation with original gathering and boosting pressure
6. High-pressure flushing chip and breakage tool cooling cycle.
7. Tank cleaning and cargo oil measurement for loading and transportation
8. Feeding stripping, cargo oil loading transfer, separation, and mixing
Section 3: Application FieldsScope：
1. The triple screw pump is suitable for transporting non-abrasive particles, liquids that do not chemically erode the pump materials, and lubricating fluids. The media it transports include various oils and oil derivatives.
2. Products include thermal conductive, lubricating, hydraulic oils, asphalt, lubricating greases, chemical products, and lubricating media such as paraffin, wax oil, soap, etc.
3. Used for fuel injection in heating equipment, fuel supply and delivery pumps.
4. Used in the mechanical industry as hydraulic, lubricating, and remote-control motor pumps.
5. Load, transfer, and supply liquid pumps for chemical, petrochemical, and food industries.
6. Used on vessels for conveying, boosting pressure, fuel injection, and lubricating oil pumps, as well as hydraulic system pumps.
IV. Meaning of Typical Model RepresentationsInterpretation:
A3NF-B Vertical Three-Screw Pump Model
A3NF-032/048-IFOGIA-G-B
A3NF-032/064-IFOGIA-G-B
A3NF-032/083-IFOGIA-G-B
A3NF-040/056-IFOGIA-G-B
A3NF-040/068-IFOGIA-G-B
A3NF-040/080-IFOGIA-G-B
A3NF-040/104-IFOGIA-G-B
......
Here's the part for this model. For more information, please inquire with AKP.
Five.Key Features:
1. Modular design scheme → High interchangeability, low maintenance costs
2. Light radial wear-resistant sliding bearing → Long service life
3. High efficiency → Low operational costs.
4. Screw rotor axial force balance → Bearings do not bear axial force
5. Lower axial flow velocity → Improved start-up capability
6. Single shaft seal → Easy maintenance, low cost
7. Resistance to cavitation and gas bursting → Low noise, minimal vibration
8. Wide applicability of magnetic drive, sealedless, and leakproof design version
9. Availability of semi-submersible suspended and long arm designs → Customizable diving depths that address the operational conditions where pump self-priming capacity exceeds atmospheric pressure
10. The jacketed insulation design effectively solves the problem of high-temperature transmission medium.
11. Various oil inlet and outlet arrangement options → Meet various on-site installation conditions
12. Diverse installation methods available for selection
13. Integrated Pump Bushing Design Version → Enhanced Cost-Performance Experience
