We specialize in the supply of industrial products such as aluminum angles, aluminum panels, aluminum grilles, aluminum curtain walls, aluminum hanging panels, aluminum strips, aluminum round tubes, metal wire mesh panels, and more. We also offer home decoration aluminum ceilings, custom ceilings, square ceilings, linear ceilings, shaped ceilings, and integrated ceilings. The surface of our industrial boards is treated with imported fluorocarbon, domestic fluorocarbon, polyester powder coating, hot stamping wood grain, and roll coating. Legoh建材 is a large-scale trading and manufacturing enterprise, providing a continuous supply platform for decoration projects worldwide.
Aluminum grid ceiling construction process:
1. Construction Line Setting: Based on the ceiling grid layout plan, mark the longitudinal and transverse arrangement lines of the component materials, the outline lines of areas with complex shapes, and the ceiling elevation lines; simultaneously, determine and mark the ceiling hanging points.
2. Ceiling fastening treatment: Secure the ceiling according to design requirements using metal expansion bolts or shot fasteners to fasten ceiling connections, or directly fasten steel hanger rods, galvanized iron wire, and flat iron hangers, etc.
3. Combination and assembly of grid elements:
Assembly of partial grilles: Individual units should be assembled with each other, as well as sections with sections, forming a rhythmic pattern for the grid ceiling. It is recommended to complete the assembly on the ground whenever necessary, and then suspend according to the design specifications.
4. Grille Installation:
Leveling and Fixing: After the wooden grill is in place, use a straight line to level according to the ceiling design height before removing the top connection bolts, tighten the upper protruding parts with hangers, loosen the hangers for the upper concave parts to lower, and then reinforce the grill sections.
5. Installation Points:
(1) Installation of suspension rods: Weld the reinforcing steel suspension rods to the pre-set reinforcing steel suspension rods to extend their length.
(2) Ridge Installation: Draw the control line for the ridge top based on the ceiling height line and the dimension relationship between the ridge top and the ceiling bottom. Then, adjust the ridge height and level using hanger components until they meet the requirements.
(3) Mesh Installation: First, use fine nylon thread to pull out intersecting plane datum lines. Start the installation from a corner of the wall, lift the ceiling tiles slightly above the datum line, and temporarily secure the tile. Adjust the ceiling tiles according to the datum lines. When the ceiling area exceeds 100m², the ceiling surface should have a slight arch, typically around 1/3000 of the span. Secure the leveled hanger tiles first, then use connecting elements to fix the tiles together.
(4) Perform overall adjustments. Draw multiple parallel or perpendicular datum lines along the elevation lines, and adjust the ceiling as a whole based on these lines, checking if the ceiling's arching amount is correct. Inspect the installation and layout, and correct any deformation of the individual unit caused by installation. Verify the reliability of the fastening components at all connection points, and reinforce areas with concentrated loads.

Aluminum Grating Ceiling Features:
1. Can be assembled with a combination of different model products.
2. Facilitates ventilation and smoke exhaust in the upper ceiling gap.
3. The hanging system of the hanger net can be assembled and disassembled from bottom to top, which is convenient for installation.
4. Durable, colorfast, shape-retaining, non-toxic, elegant, corrosion-resistant, easy to clean, and oil-stain-removing features.

Application Range: Aluminum Grating
The aluminum grid ceiling series is widely used for ceiling decorations in large shopping malls, subway stations, airport annexes, bars, and office buildings, featuring innovative design, ventilation, fire and moisture resistance, and strong three-dimensional effect.

Aluminum grid ceiling features: Main and secondary ribs are arranged in a cross pattern, with clear layers, strong three-dimensional effect, innovative design, fire-resistant and temperature-tolerant, and good ventilation. Additionally, cold air outlets, exhaust outlets, stepped sections, lighting fixtures, and more can be installed within the ceiling.
Guangzhou Lego, with its skilled personnel, high-quality products, and exceptional service, enjoys widespread acclaim and preference from clients both domestically and internationally. Our products are exported to various markets. Lego boasts an experienced team in design, production, and sales, along with a comprehensive pre- and post-sales system. We fully implement the ISO9001:2000 quality management system to achieve comprehensive development in production, supply, and sales.




































