Product Introduction:
The JGS-7130AHD/AS saddle plane grinding machine is primarily a machine tool that uses the peripheral grinding of abrasive wheels to grind workpiece surfaces, and it can also grind the vertical planes of workpieces using the face of the abrasive wheel. During grinding, the workpiece can be held securely on an electromagnetic chuck, directly fixed on the worktable surface, or clamped with other fixtures. This machine can grind workpieces made of steel, iron, and non-ferrous metals.
Product Features:
1. The main shaft shaft core has been thickened from the original diameter of 40mm to 45mm, enhancing nearly 1/4 of the grinding rigidity. It optimizes the bearing position and main shaft structure, making the shaft thicker, stiffer, more durable, and offering better waterproof performance.
2. Complete column, no need for iron shims to increase height; the distance from the workbench surface to the main shaft center is increased directly from 540mm to 6400mm. The main shaft motor is 7.5 horsepower, with reinforced grinding rigidity.
3. Full recirculating lubrication recovery system enhances guide rail accuracy and the durability of transmission components; change lubricant every 5-6 months to save on oil costs.
4. Equipped with a PLC control system, the Z-axis features automatic feeding capability, allowing for operation of multiple machines by one person, thereby saving labor costs.
5. The AHD model utilizes stepping motors for feeding in all directions (up, down, front, back), features a solid-state panel for operation, and offers high cost-performance.
6. The AS model features servo motors, front and rear stepping motors, a modular touch screen operation, offering a more comprehensive set of functions, easy to learn and understand, and saving training time.
7. The AS model features an added splash guard panel, preventing debris and water mist from entering the machine tool during the grinding process.
Product Structure:
One, Left and Right Structure (X-axis):
Hydraulic transmission with a speed range of 5 to 23 meters per minute, featuring stepless variable speed.
2. Single cylinder drive ensures smooth movement of the worktable
3. Independent fuel tank design to prevent机身deformation and inaccurate precision due to hydraulic oil temperature rise
4. The volumetric leaf pump outputs power hydraulic oil, with very low machine tool noise.
5. The bed guide rail is designed as a V-shaped flat, ensuring that the worktable does not experience displacement during high-speed movement, offering more stable machining accuracy.
II. Front and Rear Structure (Y-axis):
Step motor and ball screw drive system for smooth operation, featuring stepless variable speed.
2. Features a cross-slide design with sliding saddle movement (forward and backward sliding), equipped with double V-shaped guide rails. Compared to the moving structure of grinding heads on the market, it offers higher precision and longer lifespan.
Three: Vertical Structure (Z-axis): Utilizes stepping motor (AHD) / servo motor (AS) with worm gear and worm drive, allowing for quick lifting, quick lowering, and automatic feed.
Four, Guide Rail Lubrication: The guide rail lubrication utilizes an independent full recycling system, ensuring thorough lubrication for each guide rail.
