Product Specifications:
| Main Configuration | ||||
| 1 | Controller: | Mitsubishi M70B Controller | ||
| 2 | Three-axis travel: | 500×400×300(mm) | ||
| 3 | Worktop Surface: | 400×650(mm) | ||
| 4 | Spindle Specifications: | BT30 / 20000 rpm Taiwan Yiding Spindle (Direct Drive) | ||
| 5 | Quick Shift Speed: | X﹨Y﹨ Z : 60m/min | ||
| Standard Configuration | ||||
| 1 | Centralized automatic lubrication system | 6 | Pneumatic Pull Knife Assembly | |
| 2 | Work Completion Warning Light | 7 | Network Transmission Function | |
| 3 | Electronic Handwheel | 8 | Toolbox and manual | |
| 4 | Cooling System | 9 | 16T magazine | |
| 5 | Work light illumination | |||
Technical Specifications:
| Model | TXC-T5 | |
| X-axis travel | 500㎜ | |
| Y-axis travel | 400㎜ | |
| Z-axis travel | 300㎜ | |
| Center distance from spindle to column guide rail | 375 ㎜ | |
| Spindle nose to table face | 150-450㎜ | |
| Workstation | ||
| Workbench area | 400×650㎜ | |
| Load Capacity | 250 kg | |
| T-slot width/quantity | 3-14×100 ㎜ | |
| Spindle | ||
| Spindle Taper | BT30 | |
| Spindle Speed | Direct-drive 20,000 rpm | |
| Motor | ||
| Main shaft power | 5.5 kw | |
| Three-axis motor power | X/ Y： 1.5 kw Z：2.2 kw | |
| Feed Rate | ||
| Cutting Speed | 1-12000 mm/min | |
| Three-axis rapid traverse speed | X﹨Y﹨ Z : 60m/min | |
| Positioning Accuracy (mm) | ±0.003/300 | |
| Repeatability Accuracy (mm) | ±0.0025 | |
| Other Specifications | ||
| Mechanical weight | 3000 kg | |
| Mechanical dimensions | 2800*3000*2850 | |
| Water Tank Capacity | 110L | |
| Section 3: Standard Accessories Details | ||
| Serial Number | Standard Configuration | Origin |
| 1 | Mitsubishi M70B Controller | Mitsubishi of Japan |
| 2 | Display Unit | Mitsubishi of Japan |
| 3 | Three-axis motor | Mitsubishi of Japan |
| 4 | Spindle Motor | Mitsubishi of Japan |
| 5 | BT30-20,000 rpm spindle | Taiwan Ruiyin |
| 6 | C3 Precision Ball Screw | Taiwan Sun Yat-sen/Silver Tai |
| 7 | Three-axis telescopic inner guard | Taiwan's Central Region |
| 8 | Centralized automatic lubrication system | River Valley / Proton |
| 9 | Tapered Ball Bearing Import | Germany FAG |
| 10 | Axial Coupling | Germany R+W |
| 11 | Wires | Shanghai Zhehong |
| 12 | Operation Panel Unit | Shanghai Zhehong |
| 13 | Handwheel | Shanghai Zehong |
| 14 | LED Work Lighting Lamp | Shanghai Zhehong |
| 15 | Relay board | Shanghai Zhehong |
| 16 | Three-color alarm light | Shanghai Zhehong |
| 17 | Circuit Breaker | France (Schneider) |
| 18 | Contactor | France (Schneider) |
| 19 | Cutting Coolant Motor | Changzhou Nok |
| 20 | Electrical Box Heat Exchanger | Rike |
| 21 | Ethernet cable | |
| 22 | Punching Die Cylinder | |
| 23 | Blowing System | |
| 24 | Toolbox | |
| 25 | 1-inch screwdriver | |
| 26 | Hexagon wrench | |
| 27 | Locking knife holder 1 | |
| 28 | Set of blades (including a set of sprocket jaws, Latin, and wrench) | |
| 29 | Pressure plate set | |
| 30 | 6-inch flat-nose pliers, 1 pc. | |
| 31 | Large Cross Screwdriver | |
| 32 | Programming Manual | |
| 33 | Operation Manual | |
| 34 | Leveling Adjustment Pads | |
| 35 | Quality Inspection Report | |
Technical Service Requirements:
4.1 Installation and Commissioning: The Seller is responsible for free installation, tuning of the equipment, and on-site training for the operation and maintenance personnel at the Buyer's site.
4.2 Technical Support: The Seller provides effective technical support, and can adjust machine tool parameters according to the product characteristics required by the Buyer.
4.3 Warranty Period: After the machine tool is accepted, a 12-month free warranty is provided. During the warranty period, free parts and services are offered, with timely and effective service.
4.4 Service Time Commitment: The seller promises that the after-sales service personnel will arrive on-site to handle the machine tool failure repair within 24 hours of receiving the repair report.
4.5 Post-warranty technical support: Within two years after the warranty period expires, the seller provides free software technical consulting services. In case of failure in the machine tool's mechanical or system parts, the seller offers free software technical consulting services.
4.6 Post-warranty parts supply: After the warranty period expires, the seller may continue to supply the buyer with discounted spare parts for repairs, with the repair parts being provided to the buyer at the seller's procurement cost price.
Machine Tool Acceptance:
5.1 Receiving Standards: To be conducted according to technical requirements and parameters.
5.2. Acceptance Procedure:
5.2.1 Upon completion of debugging at the seller's factory, the buyer may conduct a preliminary acceptance. Inspect geometric and positioning accuracy, process standard specimens, and verify processing accuracy and range. Only upon passing the inspection and both parties signing, can the shipment proceed.
5.2.2 Inspection results are to be determined by the final acceptance.
Manufacturing Documents:
| Serial Number | File Name | Quantity |
| 1 | Machine Accessories List | 1 |
| 2 | Inspection Certificate of Factory Shipment | 1 |
After-sales Service:
1. One-year warranty for product quality issues, starting from the date of goods delivery.
2. If used by a user entity, damages caused by misuse or modification are not covered under the above warranty. The user must bear the cost of repairs.
