Product Specifications:
| I. Main Configuration | ||||
| 1 | Controller: | Mitsubishi M70B Controller | ||
| 2 | Three-axis travel: | 600×400×300(mm) | ||
| 3 | Work Surface: | 700×420(mm) | ||
| 4 | Spindle Specifications: | BT30 / 20,000 rpm Taiwan Yuesin Spindle (Direct Drive) | ||
| 5 | Fast Shifting Speed: | X﹨Y﹨ Z : 60m/min | ||
| Standard Configuration | ||||
| 1 | Centralized automatic lubrication system | 6 | Pneumatic Pull Knife Device | |
| 2 | Work Completion Warning Light | 7 | Network Transmission Function | |
| 3 | Electronic Handwheel | 8 | Toolbox and Instruction Manual | |
| 4 | Cooling System | 9 | St.杰16T Umbrella-Type Tool Magazine | |
| 5 | Work Light Lighting | |||
Technical Specifications:
| Model | TXC-1270W | |
| X-axis travel | 600㎜ | |
| Y-axis stroke | 400㎜ | |
| Z-axis travel | 300㎜ | |
| Distance from main shaft center to pillar guide rail | 400 ㎜ | |
| Spindle nose to table surface | 150-450㎜ | |
| Workstation | ||
| Workbench Area | 700×420㎜ | |
| Load Capacity | 250 kg | |
| T-slot width/quantity | 3-14×125 ㎜ | |
| Main shaft | ||
| Spindle Taper | BT30 | |
| Spindle Speed | (Direct Drive) 20,000 rpm | |
| Motor | ||
| Spindle Power | 5.5 kw | |
| Three-axis motor power | X/ Y： 1.5 kw Z：2.2kw | |
| Feed Speed | ||
| Cutting Speed | 1-12000 mm/min | |
| Three-axis quick movement speed | X﹨Y﹨ Z : 60m/min | |
| Positioning Accuracy (mm) | ±0.003/300 | |
| Repeatability Accuracy (mm) | ±0.0025 | |
| Other Specifications | ||
| Mechanical Weight | 3000 kg | |
| Mechanical dimensions | 2300*2900*2500 | |
| Water Tank Capacity | 110L | |
| Section 3: Standard Accessories Details | ||
| Serial Number | Standard Configuration | Origin |
| 1 | Mitsubishi M70B Controller | Mitsubishi of Japan |
| 2 | Monitor Unit | Mitsubishi of Japan |
| 3 | Three-axis motor | Mitsubishi of Japan |
| 4 | Spindle Motor | Mitsubishi of Japan |
| 5 | BT30-20,000 rpm spindle | Taiwan Ruiyin |
| 6 | C3 grade ball screw | Taiwan Sun Yat-sen/Silver Tai |
| 7 | Three-axis telescopic inner guard | Taiwan, Central Region |
| 8 | Centralized Automatic Lubrication System | River Valley / Proton |
| 9 | Tapered ball bearing import | Germany FAG |
| 10 | Axial Coupling | Germany R+W |
| 11 | Wires | Shanghai Zhehong |
| 12 | Operation Panel Unit | Shanghai Zhe Hong |
| 13 | Handwheel | Shanghai Zhehong |
| 14 | LED work lighting fixture | Shanghai Zhehong |
| 15 | Relay board | Shanghai Zhe Hong |
| 16 | Three-color alarm lights | Shanghai Zehong |
| 17 | Circuit Breaker | France (Schneider) |
| 18 | Contactor | France (Schneider) |
| 19 | Cutting Coolant Motor | Changzhou Nok |
| 20 | Electrical cabinet heat exchanger | Ruike |
| 21 | Main shaft oil cooler | Ruike |
| 22 | Ethernet Cable | |
| 23 | Drill cylinder | |
| 24 | Blow System | |
| 25 | Tool box | |
| 26 | 1-inch screwdriver | |
| 27 | Hexagon socket wrench | |
| 28 | Locking knife mount one | |
| 29 | A complete set of blades (including a set of hooks, Latin, and wrench) | |
| 30 | Pressure plate set | |
| 31 | 6-inch flat-nose pliers set | |
| 32 | Large cross screwdriver | |
| 33 | Programming Manual | |
| 34 | Operation Manual | |
| 35 | Leveling Adjustment Pads | |
| 36 | Quality Inspection Report | |
Technical Service Requirements:
4.1 Installation and Commissioning: The Seller shall be responsible for free installation, adjustment of the equipment, and on-site free training for the operation and maintenance personnel at the Buyer's site.
4.2 Technical Support: The Seller shall provide effective technical support and adjust machine tool parameters according to the product characteristics required by the Buyer.
4.3 Warranty Period: Upon acceptance of the machine tool, a 12-month free warranty is provided. During the warranty period, free parts and services are offered, with timely and effective service.
4.4 Service Time Commitment: The seller promises that the after-sales service personnel will arrive on-site to handle the machine tool failure repair within 24 hours of receiving the repair report.
4.5 Post-warranty technical support: Within 2 years after the warranty period expires, the seller provides free software technical consulting services. In case of failure in the machine tool's mechanical or system parts, the seller offers free software technical consulting services.
4.6 Post-warranty parts supply: After the warranty period expires, the seller shall provide the buyer with discounted replacement parts on a long-term basis, with the parts offered to the buyer at the seller's cost price.
Machine Tool Acceptance:
5.1 Acceptance Standards: Conducted according to technical requirements and parameters.
5.2 Receiving Procedure:
5.2.1 Upon completion of debugging at the seller's factory, the buyer may conduct a pre-inspection. This includes checking geometric and positioning accuracy, as well as processing standard test pieces to verify processing accuracy and range. Both parties must sign off on the inspection before shipment can be made.
5.2.2 Inspection results are to be determined by the final acceptance.
Manufacturing Documents:
| Serial Number | File Name | Quantity |
| 1 | Machine accessories list | 1 |
| 2 | Manufacturing Quality Inspection Sheet | 1 |
After-sales Service:
1. One-year warranty for product quality issues from the date of goods delivery.
2. If the unit is used, any damage that is not natural due to improper use or modification is not covered by the above warranty. The user must pay for the repair costs.
