Serial Number NO | Performance properties | Unit unit | Index standard | Inspection Results result |
1 | Appearance Exterior | Phenolic molding compound samples must be free of impurities and dirt, with a bright and smooth surface. | Compliant | |
2 | Bend Strength Flexural Strength | MPa | ≥70 | 70.58 |
3 | Simply supported beam notch impact strength Notched lzod lmpact | KJ/m2 | ≥1.3 | 1.32 |
4 | Simply supported beam impact strength Impact Strength(without notched) | KJ/m2 | ≥4.5 | 4.53 |
5 | Load deformation temperature Tf1.8 Temperature of deflection | ℃ | ≥160 | 163℃ |
6 | Volume resistivity Volume Resistivity | Ω.cm | ≥10 | 4.06*10 |
7 | Surface Resistance Surface Resistivity | Ω.cm | ≥10 | 3.02*10 |
8 | Electrical Strength Dielectric Strength | KV/mm | ≥10 | 10.25 |
9 | Absorbent Water absorption | mg | ≤100 | 35 |
10 | Flammability (UL94 Flame Retardancy) UL 94 Flame Class | mm | HB2-10 | / |
11 | Medium Loss Factors (1MHz) (tanδ) | ≤0.1 | 0.043 | |
12 | Durable Track-Index (PTI) | ≥125 | 125 |
Data is for reference only.
