| XH-9 Type Gate Opening Load Gauge -- Gate Opening Load Measurement and Control Instrument |
1Overview: XH-9Sluice gateOpen Gate Load Measurement Controller, manufactured based on the actual engineering needs of the user, features gate opening and load display and control. The three channels operate independently, without interference. Utilizes microcomputer control technology, with gate opening and load(LEDOrLCD)Display; Relay action due to opening limit exceeded (upper limit, lower limit,)K1、K2Four set points); overload relay operates ( )90%The relay's corresponding indicator light illuminates when the relay operates. For equal left and right loads, the relay output is a passive contact, with normally open and normally closed contacts available for user selection.4-20mASignal Passive(Active)Output,Convenient and reliable,Strong anti-interference performance.RS485Signal is standardmodbusAgreement, applicable to all modelsPLCCommunicate. For arc gate parameter adjustment,Gauges are used30Segment correction parameters effortlessly resolve the hassle of on-site surveying and arc door angle calculations. This series is highly adaptable, widely used in hydropower plants, reservoirs, cranes, and other industries. It is suitable for various gates (including flat gates, curved gates, bi-gates, gate machines, bridge cranes, etc.) and for measuring lifting height and load in the crane industry. It facilitates connection with various automated control systems, enabling gate group control and remote control. It achieves automatic control and unmanned operation. Monitor Assembly Controller: (Cut-out Size:152*76mmDimensions:160*80*200mm） Measurement Range: 0-99.99 meters. Load Capacity: 0-500.0T. Output Contact Openings (Upper, Lower, K1, K2). Load (110%, 90%, Underload) Resolution: 1cm, 1mm (optional). Load 0.1T Output Signal: Rs485, 4-20mA. Operating Voltage: AC220V±10%; DC24V. Relay Contact Capacity: AC220V/2A, DC125V/2A. Enclosure Dimensions: Panel Mount (H 76×W 152×D 180mm), Wall Mount 170*230. Input Signal Transmission Distance: Encoder - Up to 2Km; Imported SSI Signal - 100m. Analog Signal - 40m. Working Environment Temperature: -20 to 65°C. Humidity: ≤90%.3Ordering Instructions 1). Measurement Range, Resolution; 2). Selection of opening and load sensor models 3). When the gate is raised, does the encoder shaft rotate clockwise or counterclockwise? 4). What communication methods and output signals are required? 5). Please specify if cables and remote displays are required for ordering. 6). The gate opening sensor measures the height the gate rises after the output shaft turns one full revolution.
|
