The 884 Model Liquid Density Meter is a sensor installed on pipelines, capable of continuously and real-time online measurement of fluid density. It is used for process control where density is the primary control parameter for the final product, or as an indicator for other quality control parameters such as solid percentage or concentration percentage.
Product Features:
Straight Pipe
* Can measure slurry with a large amount of bubbles, crystallization, and high viscosity conditions
A variety of materials and flanges are available.
High-Precision Continuous Measurement
* Contains isolation bellows
* The equipment is suitable for harsh environments and can be installed in hazardous areas.
* Not sensitive to factory vibration, pressure, and temperature impacts
No need to alter existing mating flanges, reducing installation costs.
In the event of an internal failure in the circulation medium, control the leakage of the medium
Technical Specifications:
| Sex Available Please provide the Chinese content to be translated. Numbers | Accuracy | ±0.001g/cc | ±1.0 kg/m3 | ||
| Scope of Work | 0~3 g/cc | 0~3000 kg/m3 | 0 to 187.4 lb/ft³ | ||
| Repetitive | ±0.0001 g/cc | ±0.1 kg/m3 | ±0.006 lb/ft3 | ||
| Process Temperature Influence (Adjusted) | ±0.0001 g/cc | ±0.1 kg/m3 | (Per °C) | ||
| Process Pressure Influence (Corrected) | Negligible | ||||
| Process Temperature | –50℃~+150℃（–58℉~+302℉） | ||||
| Ambient Temperature | –40℃~+85 ℃（–40℉~+185℉） | ||||
| High work pressure | 884 (Standard Model) | 2MP | |||
| 884 (High Pressure Type) | 1450 psi (100 bar) | ||||
| Test Pressure | Tested under 1.5 times the normal working pressure | ||||
| IP rating | IP65 | ||||
| Material Quality Please provide the Chinese content to be translated. Structure | Liquid Receiving Component | 884 (Standard Model) | Stainless Steel 316L | ||
| 884 (Corrosion-resistant) | Alloy C22, Titanium | ||||
| Electronic component housing | 884 (Standard Type) | Aluminum alloy casting | |||
| 884 (Corrosion-resistant) | Stainless steel or plastic | ||||
| Pipe polishing | 884 | Standard, Electro-polished | |||
| Please provide the Chinese content you would like translated into American English. Quantity | Weight | 884 (Standard Model) | Typical value: 45 kg | ||
| 884 (Special Type) | Subject to pipeline | ||||
| Special Sex | Power Requirements | Voltage | 24VDC (requires a four-wire system) | ||
| 220VDC (four-wire system required) | |||||
| Output | Current Output | Power modulation on the power line is a 2-wire system (4~20mA) | |||
Dimensions:
