996Aerosol can type cleaning agent
Product Introduction
996Strong cleaning agent, aerosol can type, can quickly remove residual rosin, resin, activity, etc. from welding on circuit boards or electronic components, used for cleaning after circuit board assembly or maintenance.
Product Features
1. Strong cleaning ability, fast
2Safe and non flammable
3Low odor, quick drying without residue
4Suitable for removing various rosin and resin soldering aids(R、RA、RMA、SA)Welding residues
5It can also be used to clean adhesive substances on various circuit boards
Instructions for use
1. Shake well before and during use.
2. Always keep the spray can upright during use.
3Prohibited from being used for live equipment and operating near open flames.
4. Spray evenly from the nozzle at a distance of 15-30cm from the target, press the pressure valve, and directly spray onto the surface of the object to be processed.
5. Use intermittent spraying to loosen and remove stubborn dirt, and allow the remaining liquid to flow down.
6. For precise spraying or use in hard to reach areas, an extended thin tube can be used; If necessary, repeat the operation until satisfactory cleanliness is achieved.
7This product may be damagedABS, PS and other plastic materials should be tested before use.
Precautions
1. This product contains pressurized gas, please stay away from heat sources and open flames; Do not puncture, impact or burn aerosol cans.
2. Keep away from children and store in a cool and dry place below 40 ℃.
3This product has a slight odorHas slight irritation to the skin and eyes. If accidentally splashes into the eyes, please rinse immediately with plenty of water. If discomfort persists, please check in a timely manner; Please rinse immediately with soap and plenty of water after skin contact. If inhaled, move the patient to fresh air and seek medical attention immediately if necessary.
4. If you need more safety precautions for this product, please refer to our company's Material Safety Data Sheet MSDS.
execution standard:SN/T4759-2017
Production DateSee packaging (qualified) shelf life: 24 months
