Product Name:
Product Name: Aifake Vacuum Pump Oil
Brand: Japan Ultravac (ULVAC)
Model: R-4
Dimensions: 5L, 20L, 200L
Product Specifications:
Origin: Japan
Import Status: Yes
Category: Vacuum Pump Oil
Viscosity Coefficient: 68
Weight: 0.88
Flash Point: 220 (°C)
40℃ kinematic viscosity: 68 (cSt)
Pour Point: -12 (°C)
Model: R-4
Aifake Technical Specifications Table:
Product Showcase:
Product Performance:
Excellent antioxidant and thermal stability, significantly extending the service life of lubricants.
Low-carbon tendency, effectively prevents the formation of胶质 and carbon slag.
Low vapor pressure and volatility ensure an appropriate vacuum level within the vacuum pump.
Excellent extreme pressure anti-wear protection and good anti-foaming, air release properties.
Cautionary Notes:
Vacuum pump oil has a shelf life of up to 3-5 years under sealed conditions; unopened, it is guaranteed for 3 months.
* Replace pump oil after the first 500 hours of use of the new pump, and then every 1000-1500 hours thereafter. (Note: In harsh operating environments, it is necessary to frequently observe the color of the pump oil.)
Check the oil level sight glass. Replace the vacuum pump oil when the oil turns from yellow-brown to black or milky white.
Selecting the appropriate vacuum pump oil will greatly benefit the pump's ultimate differential pressure, ultimate full pressure, startup, power consumption, pump temperature, stability of pump performance, and the service life of the vacuum pump.
Vacuum Pump Oil Change Method
Remove the drain valve by hand, lift the pump housing to allow the old oil in the vacuum pump to automatically flow into the position of the rotating oil cap. Once the old oil is drained, inject a small amount of clean vacuum pump oil (100-500mL) into the vacuum pump's oil filling point to flush the internal chamber. Then, operate the vacuum pump for about 1 minute, turn it off, and release the newly injected oil. If the released oil is still not clean, continue to inject new oil for flushing until it is clean.
Then, unscrew the drain valve, remove the oil filling cap from the filling hole, add new vacuum pump oil into the vacuum pump until the oil level reaches the oil marking line, and then screw the filling cap back on.
Our Services
Product Selection Consultation - Vacuum System Customization - Vacuum Technical Consulting - Maintenance Service Contract - Extended Warranty Service
