Product Name:
Name: Ritchie
Brand: Rierschle (Germany)
Model: MULTI-LUBE100
Specification: 5L
Product Specifications:
Category:Vacuum Pump Oil
Viscosity Coefficient:100
Brand:Richelieu
Weight:0.96
Shine Point:260（℃）
40℃ Dynamic Viscosity:108（cSt）
Pour point:-15（℃）
Model No.:MULTI-LUBE100
Product Showcase:
Ricela Technology Specifications Table:
Product Performance:
Excellent antioxidant and thermal stability, significantly extending the service life of lubricants.
Low-carbon tendency, effectively prevents the formation of glue and carbon slag.
Low vapor pressure and volatility ensure an appropriate vacuum level within the vacuum pump.
Excellent wear protection properties, along with good anti-foaming and air release characteristics.
Cautionary Notes:
Vacuum pump oil can maintain its quality for up to 3-5 years under sealed conditions; unopened, it is guaranteed for 3 months.
* Replace pump oil after the first 500 hours of use in the new pump, and then every 1000-1500 hours thereafter. (Note: In harsh operating environments, it is necessary to regularly observe the color of the pump oil.)
Check the oil level sight glass; replace the vacuum pump oil when the oil turns from yellow-brown to black or milky white.
Proper selection of vacuum pump oil will significantly benefit the pump's ultimate differential pressure, ultimate total pressure, startup, power consumption, pump temperature, stability of pump performance, and the lifespan of the vacuum pump.
Vacuum Pump Oil Change Procedure
1. Open the drain valve using the gravity method, lift the pump housing to allow the old oil in the vacuum pump to automatically flow into the position of the oil drain screw. After the old oil is drained, inject a small amount of clean vacuum pump oil (100-500mL) into the vacuum pump from the oil filling port to flush the interior of the pump chamber. Then, run the vacuum pump for about 1 minute, turn it off, and drain the newly added oil. If the drained oil is still not clean, continue to inject new oil for flushing until it is clean.
Next, unscrew the drain valve, remove the oil filling cap from the oil filling hole, add new vacuum pump oil into the vacuum pump until the oil level reaches the oil mark, and then tighten the oil filling cap.
Our services
Product Selection Consultation -- Vacuum System Customization -- Vacuum Technology Consultation -- Maintenance Service Contract -- Extended Warranty Service
