Product DescriptionProduct introduction

Product Information

• Origin: Beijing

• Conductivity Sensor

• Brand: Zhongke Zhengqi

• Model: ZK-SDDL

Product actual photosProduct picture

Parameters

Measurement Principle: Spectrophotometric Absorption Method

Measurement Range: 0.2000 μS/cm

Resolution: 0.1 μS/cm

Accuracy: ±2%FS

Instructions for Use

Before opening the package, please inspect for any damage. If the outer packaging is damaged, do not proceed to open the package. Please contact the sales company, the nearest authorized agent, or us directly immediately. Have the carrier's representative present to jointly open the package and inspect for damage to the electrodes. It is recommended to take photos as evidence.

2 Electrode conductivity should be dried before storage; do not store electrodes in distilled water or deionized water.

During the measurement process, if there is dirt, adherent material, or scaling at the front end of the electrode, it can lead to inaccurate or fluctuating measurements. It should be cleaned and calibrated promptly.

4 The content of this manual may change as the product is continuously improved. Our company will not notify this in the manual and shall not be liable for any consequences arising therefrom.

Installation Instructions

Please carefully follow the instructions for wiring; incorrect wiring will result in complete product damage.

Do not energize the cables until all connections are completed to avoid any danger. Be sure to thoroughly inspect all system wiring before energizing, and only proceed when it is confirmed to be completely correct.

Purchase InstructionsPurchase notice

1. About the Product

All returns for repair, regardless of the reason, must be approved by our Customer Service Department before shipping back. Upon approval, please return the repair form along with the repaired item. The returned items must be carefully packaged to prevent damage during transit and insurance should be added to avoid damage or loss. Our company will not be responsible for any damage caused by the loss of repair items or poor packaging.

2. Regarding After-Sales

Our company offers a one-year warranty on instruments and sensors from the date of purchase by the customer. Should any damage occur due to non-artificial misuse within the warranty period, please prepay the shipping fee, properly package the instrument, and return it to us free of charge for repair. Our company will analyze the cause of the actual damage to the instrument and charge for repairs if it exceeds *** conditions.

3. Shipment Information

Free Shipping Nationwide