The GEROYAL electric high-pressure ball valves are composed of forged steel high-pressure valve bodies and imported angular position electric actuators. The electric actuators feature a monolithic structure, allowing direct on/off adjustment with a 220V power input. They can also be equipped with a servo module, controlled by input signals (4-20mADC or 1-5VDC) and single-phase power. The main components of the electric high-pressure ball valves are forged by professional manufacturers, overcoming the potential defects of cast steel valves, and maintaining uniform compressive strength under higher working pressures. Suitable media include water, oil, gas, corrosive media, and acidic or alkaline corrosive media. These electric high-pressure ball valves are widely used in industries such as chemicals, petroleum, natural gas, metallurgy, and in long-distance gas pipelines with high sulfur content, heavy impurities, and severe corrosion.
Electrical High-Pressure Ball Valves: Key Technical Parameters and Performance
| Nominal Pipe Size DN (mm) | 6 | 8 | 10 | 15 | 20 | 25 | 32 | 40 | 50 |
|
|
|
|
|
|---|
| Permitted Pressure Difference (MPa) | Nominal Pressure ≤ |
|
|
|
|
|
| Valve body style | Three-section forged valve body |
|
|
|
|
|
| Nominal Pressure | PN16.0、25.0、32.0、42.0 MPa；ANSI 150、300、600、900、1500、2500LB |
|
|
|
|
|
| Connection Type | Welded (butt weld, socket weld) |
|
|
|
|
|
| Sealed packing material | Nylon, V-shaped PTFE fillers |
|
|
|
|
|
| Valve core type | O-ring ball valve core |
|
|
|
|
|
| Flow characteristics | Approximate quick release feature |
|
|
|
|
|
| Action Range | 0～90°、0～360° |
|
|
|
|
|
| Leakage Quantity Q | Soft-sealed: Zero leakage |
|
|
|
|
|
| Basic Tolerance | ±1% |
|
|
|
|
|
| Back Allowance | ±1% |
|
|
|
|
|
| Dead zone | ≤1% (adjustable) |
|
|
|
|
|
| Adjustable Range | 250：1 |
|
|
|
|
|
| Configuration of actuator | Available with PSQ, BV-TORK, UNIC, 361RS, OV-TORK, etc. series of angular position electric actuators. |
| Control Method | Switch-in-place Light (dual-position switch), Passive Contact Signal, 1/5K Potentiometer, Smart Adjustment (4-20mA Analog Signal Control) |
Electrical High Pressure Ball Valve Actuator Technical Specifications
| Actuator Category | Imported OV-TORK Series Actuator Specifications | BV-TORK Series Actuator Parameters |
|---|
| Power Voltage | Standard: 220V AC Single Phase, Optional: 110V AC Single Phase, 380/440V AC Three Phase, 24V/110V/220V AC |
| Output Torque | 50N·M～2000N·M | 50N·M～3000N·M |
| Motion Range | 0～90° 0～360° | 0° to 90°, 0° to 270° options available |
| Action Time | 15 sec/30 sec/60 sec | 18S～112S |
| Protective Device | Overheat Protection | Built-in overheat protection, overload protection |
| Ambient Temperature | -30°～60° | -20℃～+70℃ |
| Manual operation | With handle for operation | Mechanical clutch mechanism, with handwheel operation |
| Mechanical Limit Switch | Electrical and mechanical double limit | 2 external adjustment bolts |
| Ingress Protection (IP) rating | IP65 | IP65, IP67, Customizable IP68 |
| Intrinsically Safe Rating | Non-explosive | ExdⅡ BT4,ExdⅡ CT6 |
| Position Measurement | Optional switch or potentiometer installation | Potentiometer, Proportional Control Unit |
| Drive Motor | 8W/E | Cage-type asynchronous motor |
| Input interface | PE1/2" Line Entry Lock | 2 PF 3/4" |
| Housing Material | Aluminum alloy | Steel, aluminum alloys, aluminum bronze, polycarbonate |
| Outer coating | Dry powder, epoxy polyester, with strong anti-corrosion properties |
Electrical High Pressure Welding Ball Valve - Main Component Materials
| Part Name | Parts material |
|---|
| Valve Body | 304 | 316 | 316L |
| Sphere | 304 | 316 | 316L |
| Valve stem | 304 | 316 | 316L |
| Valve seat seal ring | PTFE, carbon fiber + PTFE, para-phenylene benzene, high-pressure nylon seals |
| Filling Material | V-shaped PTFE, reinforced PTFE |
Electrical High Pressure Ball Valve - Key Performance Indicators
| Nominal Pipe Size (mm) | DN15-300 |
|---|
| Nominal Pressure | PN(MPa) | 10.0 | 16.0 | 25.0 | 32.0 | 42.0 |
| Test Pressure | Tensile Test | 15.0 | 24.0 | 37.5 | 48.0 | 63.0 |
| Seal Test | 11.0 | 17.6 | 27.5 | 35.2 | 46.2 |
| Low-pressure Airtightness Test | 0.5～0.7 |
| Applicable Medium | Water, oil, steam, nitric acid (temperature ≤ 200℃), acetic acid (temperature ≤ 200℃) |
Electric High-Pressure Ball Valve Product Selection
(1) Valve Body Parameters: Nominal Diameter, Working Pressure, Process Medium, Application, Valve Body Material, and a series of other parameters.
(2) Actuator Parameters: Power Voltage, Control Method, Control Signal (4-20mA, 1-5V), Operating Mode (Electrical-Open, Electrical-Closed)
Please provide as much detail as possible on the above technical specifications to facilitate our production and technical staff in accurately selecting the right products for you. Should you have any questions, feel free to call us, and we will do our utmost to provide you with excellent service!
Related Names: Electric High Pressure Ball Valve, Q961N Electric Forged Steel Ball Valve
