The GEROYAL electric high-pressure three-way ball valves are composed of an angular travel series intelligent actuator and a high-pressure three-way ball valve, making them a type of rotating cut-off/valving device. These valves offer advantages such as tight closure, compact structure, lightweight, and easy maintenance. The electric high-pressure three-way ball valves are widely used in pipeline automation control for corrosive media such as gases, liquids, and oils. The three-valve seat sealed three-way ball valves feature an aesthetically pleasing design and a compact, reasonable structure. Not only can these valves switch the flow direction of the medium, but they can also interconnect the three channels, and can currently close any one channel to connect the other two, allowing for flexible control of the medium's convergence or divergence in the pipeline.
Electrical High Pressure Three-Way Ball Valve - Key Technical Parameters and Performance
| Nominal Pipe Size (mm) | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 |
|
|
|
|
|
|---|
| Allowable Pressure Difference (MPa) | Nominal Pressure ≤ |
|
|
|
|
|
| Valve body style | Quarter-body forged valve body |
|
|
|
|
|
| Nominal Pressure | PN16.0、25.0、32.0、42.0 MPa；ANSI 150、300、600、900、1500、2500LB |
|
|
|
|
|
| Connection Type | Bolted, Flanged, Welded (butt weld, socket weld) |
|
|
|
|
|
| Sealing Gasket | Nylon, V-shaped PTFE fillers |
|
|
|
|
|
| Valve core style | O-shaped ball valve core |
|
|
|
|
|
| Flow characteristics | Approximate quick-release feature |
|
|
|
|
|
| Motion Range | 0～90°、0～360° |
|
|
|
|
|
| Leakage Volume Q | Soft-sealed: Zero leakage |
|
|
|
|
|
| Basic Error | ±1% |
|
|
|
|
|
| Return Difference | ±1% |
|
|
|
|
|
| Dead zone | ≤1% (adjustable) |
|
|
|
|
|
| Adjustable range | 250：1 |
|
|
|
|
|
| Configuration of actuator | Available with PSQ, BV-TORK, UNIC, 361RS, OV-TORK series angle-positioned electric actuators. |
| Control Method | Toggle Switch Indicator (dual-position switch), Passive Contact Signal, 1/5k Potentiometer, Intelligent Adjustment (4-20mA analog signal control) |
Electrical High Pressure Three-Way Ball Valve Actuator Technical Specifications
| Actuator Category | Introducing OV-TORK Series Actuator Specifications | Imported BV-TORK Series Actuator Specifications |
|---|
| Power Voltage | Standard: 220V AC Single Phase, Optional: 110V AC Single Phase, 380/440V AC Three Phase, 24V/110V/220V AC |
| Output Torque | 50N·M～2000N·M | 50N·M～3000N·M |
| Motion Range | 0～90° 0～360° | 0° to 90°, 0° to 270° available |
| Action Time | 15/30/60 seconds | 18S～112S |
| Protective Device | Overheat Protection | Built-in overheat protection, overload protection |
| Ambient Temperature | -30°～60° | -20℃～+70℃ |
| Manual operation | With handle for operation | Mechanical clutch mechanism, with handwheel operation |
| Mechanical Limit | Electrical and mechanical double limit | 2 external adjustment bolts |
| Ingress Protection (IP) Rating | IP65 | IP65, IP67, Customizable IP68 |
| Intrinsically Safe Rating | Non-explosive | ExdⅡ BT4,ExdⅡ CT6 |
| Position Measurement | Optional switch or potentiometer installation | Potentiometer, Proportional Control Unit |
| Drive Motor | 8W/E | Cage-type asynchronous motor |
| Input Interface | PE 1/2" Inlet Line Lock | 2 PF 3/4" |
| Shell Material | Aluminum alloy | Steel, aluminum alloy, aluminum bronze, polycarbonate |
| Outer Coating | Dry powder, epoxy polyester, with strong corrosion resistance |
Electrical High Pressure Three-Way Ball Valve, Flow Principle Diagram
Electrical high-pressure three-way ball valves are available in L and T configurations; the medium flow direction is shown in the following illustration. The L-type electrical high-pressure three-way ball valve is suitable for changing the medium flow direction, allowing two perpendicular channels to connect: The T-type electrical high-pressure three-way ball valve is used for medium分流, 合流, or flow direction switching; the T-shaped bore can connect the three channels or connect two of them. These ball valves typically feature a three-seat structure, but can also be customized with a four-seat structure according to customer requirements.
 |  |
|---|
| "T" type electric high-pressure ball valve flow diagram | "L" Type Electric High Pressure Ball Valve, Flow Direction Diagram |
|---|
Electrical High Pressure Three-Way Ball Valve - Main Component Materials
| Part Name | Parts Material |
|---|
| Valve body | 304 | 316 | 316L |
| Sphere | 304 | 316 | 316L |
| Valve Stem | 304 | 316 | 316L |
| Valve seat seal ring | PTFE, carbon fiber + PTFE, para-phenylene, high-pressure nylon seals |
| Filling Material | V-shaped PTFE, reinforced PTFE |
Electrical High Pressure Three-Way Ball Valve - Key Performance Indicators
| Nominal Pipe Size (mm) | DN15-300 |
|---|
| Nominal Pressure | PN(MPa) | 10.0 | 16.0 | 25.0 | 32.0 | 42.0 |
| Test Pressure | Tensile Test | 15.0 | 24.0 | 37.5 | 48.0 | 63.0 |
| Seal Test | 11.0 | 17.6 | 27.5 | 35.2 | 46.2 |
| Low-pressure Sealing Test | 0.5～0.7 |
| Applicable Medium | Water, oil, steam, nitric acid (temperature ≤ 200℃), acetic acid (temperature ≤ 200℃) |
Electrical High Pressure Three-Way Ball Valve - Product Selection
(1) Valve Body Parameters: Nominal Bore Size, Working Pressure, Process Medium, Application, Valve Body Material, and a series of other parameters.
(2) Actuator Parameters: Power Voltage, Control Method, Control Signal (4-20mA, 1-5V), Operating Mode (Electrical-Open, Electrical-Closed)
Please provide as detailed technical specifications as possible, which will facilitate our production and technical team in accurately selecting the right products for you. Should you have any questions, feel free to call us, and we will do our utmost to provide excellent service!
Related Names: Electric High Pressure Three-Way Ball Valve, High Pressure Forged Steel Three-Way Ball Valve, Threaded Three-Way Ball Valve
