Technical Specifications:
| Specs | RJF33______ | |
| Capacity | 500VA-200KVA (Customizable according to customer requirements) | |
| Input rated voltage | 220V/380V±10% 50Hz±2％ | |
| Output | Rated Voltage | 115V/200V (Voltage range: 0V to 150V) Three-phase four-wire |
| Stabilized voltage accuracy | ≤±0.5% (full scale) | |
| Frequency | 400Hz with a tuning range of 500-2000Hz (Customizable according to customer requirements) | |
| Frequency Stability | 0.01% (Full Scale) | |
| Dynamic Characteristics | Overshoot and recovery time meet GJB572 requirements. | |
| Waveform Distortion | Pure sine wave, THD < 2.5% (linear load test) | |
| Phase difference | 1/3 Unbalanced Load 120°±1.5°, Total Unbalanced Load 120°±3° | |
| Source Adjustment Rate | ±0.2% (Full Scale) | |
| Load Adjustment Rate | ±1% (Full Scale) | |
| Digital Display | Voltage Display | True RMS 0.1V |
| Current Display | True RMS Value 0.1A | |
| Frequency Display | 0.1HZ | |
| Protect | Output short circuit, overcurrent, overvoltage, overload, internal overheating | |
| Reliability | MTBF of 8,000 hours with an average repair time of 3 hours. | |
| Comprehensive characteristics | Noise | ＜65dB |
| Inbound and outbound line methods | Backside input/output lines | |
| Cooling Method | Air-cooled | |
| In-and-out ventilation | Bottom and side air intake, top and back exhaust | |
| Protection Level | IP20 | |
| Environment | Application Environment | Temperature: -10 to 45℃; Humidity: 0 to 90% non-condensing state |
| Altitude | ≤2000m | |
Note: This power supply has been treated with appropriate electromagnetic compatibility measures, as well as moisture, smoke, and damp resistance.
