How to install a double-speed winch repair?

First, place the reducer components and the manual brake lever simultaneously on the base. Then, after positioning the large gear ring and its cover, install the drum assembly on the base, ensuring that the large gear ring and the gear mesh correctly. The contact spots along the tooth height should not be less than 40% and along the tooth width not less than 50%. Ensure the side clearance is 0.220. Next, install the motor, and use the adjustment washers under the加减 motor to adjust the motor's center height. The coaxiality allowance between the motor shaft centerline and the gear shaft centerline is θ0.32, and the angle of inclination of the two centerlines must not exceed 40'.

Anhui Teli Group produces mining winches, including winch hoists, two-speed winches, column winches, transport winches, bucket dredges, tension winches, and more.

Common models of the two-speed winches include: JSDB-10 two-speed winch, JSDB-13 two-speed winch, JSDB-16 two-speed winch, JSDB-19 two-speed winch, JSDB-25 two-speed winch, and JSDB-30 two-speed winch.

How to replace the gear shaft on a two-speed winch?

Proper axial alignment of the gear shaft can be achieved by adjusting the shims between the sleeve and the housing, as well as the circular nut on the gear shaft. For the correct axial alignment of the large bevel gear, it can be adjusted by using two sets of shims between the end caps of the two-axis assembly and the housing. The correct axial alignment of components on the three-axis and gear shaft assembly is achieved with shims between the end cap and the housing.

Anhui Teli Group produces mining winches, including scheduling winches, JSDB 13 double-speed winches, double-speed winches, rebar winches, transport winches, bucket dredges, tension winches, and more.

Common models of the double-speed winch include: JSDB-10 double-speed winch, JSDB-13 double-speed winch, JSDB-16 double-speed winch, JSDB-19 double-speed winch, JSDB-25 double-speed winch, and JSDB-30 double-speed winch.

Anhui Teli Group produces mining winches including hoist winches, double-speed winches, 55 double-speed winches, column winches, transport winches, bucket winches, tension winches, etc.

Common models of double-speed winches include: JSDB-10 double-speed winch, JSDB-13 double-speed winch, Xianyang double-speed winch, JSDB-16 double-speed winch, JSDB-19 double-speed winch, JSDB-25 double-speed winch, and JSDB-30 double-speed winch.

Pre-job Precautions:

(1) Inspect the wire rope for the jsdb 30 dual-speed winch; the wire rope must comply with the relevant provisions of the "Coal Mine Safety Regulations."

(2) Inspect the reliability of the wire rope connections, the tightness of the connecting bolts, and the stability of the winch installation, etc.

(3) Check if the lubricating oil in the reducer is sufficient; if not, supplement it. Do not arbitrarily change the quality of the lubricating oil.

(4) Inspect the brake lever, and place the brake lever handle in the released position.

Xianyang Double Speed Winch - JSDB 30 Double Speed Winch, provided by Anhui Teli Heavy Industry Mining Machinery Manufacturing Co., Ltd. Located at No. 806 Minxian Road, Economic Recycle Industrial Park, Yongqiao District, Huai'an City, Anhui Province. Striving and developing amidst the surge of market economy, Teli Heavy Industry Group has earned a good reputation in conveying equipment. The achievement of the full network marks a new height in our service and management level. All employees of Teli Heavy Industry Group are willing to work together with people of insight from all walks of life to develop and create a better future.