Detailed Description:

1. Introduction

Mold racks are used for placing various plastic molds.Hardware moldsThe storage shelf.

2. Technical Specifications

Dimensions: L3100*D600*H2000mm (3 sections*4 levels=12 drawers) Unlimited Length

Load Capacity: 800-1000 kg per drawer panel, with a total capacity of up to 9.6-12t

Material: Poles are made of 10# channel steel; rods are 40*40 square tubes; the slide bottom frame uses 50*50 angle iron; the panel is a 2.5mm thick steel plate; the sliding groove is a 4mm steel plate folded channel; bearings are imported 6404 type

Pull-out: Drawer panel can be pulled out 65%

Color: Eco-Green (default)

3. Racking Features

1. Safety-reliant supplementary insurance device

2. Lightweight operation with bearing assembly, sliding balance, and independent hoist mold attachment

3. Save space - covers an area of 1.8 square meters and can store dozens of small to medium-sized molds.

4. Simple structure, assembled from a variety of components for easy disassembly, transportation, and reassembly.

5. Each drawer mold rack compartment can bear a load of 800-1000KG per level.

6. Space-saving, each compartment can hold multiple molds, facilitating maintenance, management, and easy retrieval.

7. Molding frame board removal is easy after loading, with the ability to adjust the upper and lower spacing as desired. With the included pulleys and manual winches, storage and retrieval tasks can be completed quickly and effortlessly.

8. The mold frame features a removable structure, with all components capable of being freely combined. The upper and lower spacing allows for easy assembly and disassembly.

9. Versatile and matchable, can be used individually or easily connected, easy to install.

10. Each layer can bear up to 800kgs/1,800kgs; the structure is scientifically and reasonably designed. After assembly and shaping according to specifications, it is sturdy and reliable with high safety.