VB-Z9530 Integrated Vibration Velocity Transmitter
The VB-Z9530 integrated vibration speed transmitter is designed for measuring the bearing vibration of various steam turbines, compressors, fans, and pumps, among other rotating machinery. It converts the measurement to a 4-20mA output. It can be directly connected to DCS, PLC, or other systems, making it an ideal choice for vibration measurement of industrial equipment like fans and water pumps.
VB-Z9530 Integrated Vibration Level TransmitterIt is a bearing pedestal vibration measurement for various steam turbines, compressors, fans, and pumps, used by Shanghai Xuanji.It is a compact, interference-resistant, and easy-to-install active sensor that integrates a speed vibration sensor and transmitter, directly converting vibration speed (or displacement) values into a 4-20mA output. This transmitter can be directly connected to DCS, PLC, or other systems, making it an ideal choice for vibration measurement of factory equipment such as fans and pumps.
Installation Position: Vertically or horizontally mounted on the point of the measured vibration, secured with an M10 screw at the transmitter's bottom.
VB-Z9530 Integrated Vibration Speed Transmitter
Technical Parameters: Sensitivity: 20mv/mm/s ±5%, 30mv/mm/s ±5%, 50mv/mm/s ±5%
2. Frequency Response: 4.5 ~ 1000 Hz
3. Natural Frequency: 10 Hz
4. Measurement Range: 1, 0-10 mm/s, 0-20 mm/s, 0-50 mm/s, 0-100 mm/s
2、0～100um、0～200um、0～500um,0-1000um,
Output Current: 4-20mA
6. Output Impedance: ≤500Ω
7. Working Voltage: DC 24V
8. Maximum Acceleration: 10g
9. Measurement Direction: Vertical or Horizontal
10. Operating Environment: Temperature -30℃ to 50℃; Relative Humidity ≤90%
11. Thread Installation: M10×1.5
12. Dimensions: φ35×75mm.
