Product Features:

Digital Inclination Meters (four models: Aluminum Alloy with Magnet, Aluminum Alloy without Magnet, Stainless Steel with Magnet, Stainless Steel without Magnet)

Key Features:

3600° x 0.01° Full Measurement

When the tiltmeter is inverted, the LCD angle reading will automatically flip upwards for easy reading.

Precision mechanical stainless steel frame structure.

No special tools or equipment are required for realignment.

All-in-one multi-purpose measuring tool, featuring a protractor, inclinometer, and level.

A 3-volt battery can last for 3000 hours of continuous use.

Technical Specifications:

Range: 4 x 90° (0~360°)

Operating Temperature: +5℃ ~ +40℃

Operating Humidity: ≤85%RH

Display Resolution: 0.1°

Accuracy: ≤0.2°

Power Source: CR2032 3V Lithium Battery

Impact-resistant aluminum alloy mechanical structure, sturdy and durable.

2. The base features a V-shaped design, suitable for use on both curved surfaces and cylindrical surfaces.

3. Base features #6-32 threaded holes for extended base installation for special measurements

4. Uses a standard 9V alkaline battery, which typically lasts for 250 hours under normal conditions.

5. The display will show a "B" signal when the battery is low.

6. The ON/OFF switch is for power control, and this instrument features an automatic power-off function after 5 minutes.

7. Press the HOLD key to retain data. Pressing this key will cause a square blinking signal to appear at the upper right corner of the display, indicating that the data is being held in place. Press the key again, and the blinking signal will disappear, restoring the original state.

8. ALT ZERO is the reset button. Pressing this button will display an "ALT" indicator blinking at the bottom right corner of the screen, indicating the data has been reset. Press again to stop the blinking and restore to normal state.

9. CALIBRATION is the feature for re-self-calibration.